Installation Guide

20
The remote control can be used up to 13 feet(4 meters) away from the heater, so long as there are no obstructions
between the remote control and the heater.
A: Power
B: Flame
C: Ember Bed
D: Heater
E: Timer
F: Child Lock
G: Flame Speed
H: Down
I: Flame Brightness +
J: Flame Brightness -
K: Up
L: Crackling Sound
Remote Control Operation
Crackling Sound Button
This option is invalid on Flame OFF state.
• Press to active the Flame Speed mode.
• Press again to cycle through different level of the crackling sound. See the table for more detailed information.
Child Lock Mode
• Press and hold the Ember Bed Button + Crackling Sound Button for 5 seconds to active the Child Lock function. The
Display Screen will display “_ _ _” and the control panel will be invalid until you press and hold the Ember Bed Button
+ Crackling Sound Button for 3 seconds again to exit the Child Lock function.
Display Screen
The digital display will show the numbers for corresponding function of the corresponding operation. The screen flickers
during setting operation, exit the setting mode after 10 seconds of no operation, and turns off the screen after another 10
seconds to enter standby.
A
B
C
D
E F
G
H
IJ
K
L
Display Value
OFF
Sound
3
2
1
OFF