ELECTRIC FIREPLACE STOVE IMPORTANT READ ALL INSTRUCTIONS BEFORE USING YOUR ELECTRIC FIREPLACE. FAILURE TO FOLLOW INSTRUCTIONS MAY LEAD TO DAMAGE TO THE MACHINE OR PERSONAL INJURY. KEEP THIS USER MANUAL FOR FUTURE REFERENCE.
Warranty Registration..............................................................................01 Safety Instructions...................................................................................02 Electrical Safety .......................................................................................03 US 3-Pin Polarized Plug...........................................................................03 Technical Specifications .......................................................................
Warranty Registration Thank you for purchasing a TURBRO Electric Fireplace! We’re extremely happy that you have decided to join us. To thank you we’re giving you a warranty extension. All you need to do is register your new product at https://www.turbro.com/pages/warranty-registration. Once it’s registered, you’ll get a 1-year extension on the 1-year manufacturer warranty for a total of 2 years.
Safety Instructions To prevent possible fires, do not block air intakes or exhausts in any manner. Do not use on soft surfaces, like a bed, where the opening may be blocked. The fireplace has hot, sparking, and arcing parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored. This appliance should not be used as a drying rack for clothing. Use this appliance only as described in this manual.
Technical Specifications Voltage 120V AC Frequency 60 HZ Amps 11.
INSTALLATION WARNINGS The fireplace is heavy and should be assembled near its desired location It is recommended that two people move the fully-assembled fireplace to prevent injury Do not install the unit on shelved, raised platforms, beds, blankets, pillows, etc. Keep combustible materials such as furniture, bedding, papers, clothes, and curtains at least 3 ft away from the fireplace.
Parts List TOOLS REQUIRED Phillips-head screwdriver (not included) Tip: Use a 6-8 inch screwdriver to attach the legs. A long screwdriver will help you quickly finish assembly. BEFORE ASSEMBLY Open the unit and check carefully for visible damage. If you have any problems with installation, operation, missing parts, or other damage, please contact the TURBRO customer service team. Do not dispose of packaging until you are satisfied with your fireplace.
Control Panel Press the main power button to turn on the fireplace. 1. LCD Screen: Displays information about the settings you are using. 2. Indicator Lights: There are 3 indicator lights below the LCD screen -- red, green, and blue. a. Red - Indicates that the LCD screen is displaying the temperature in degrees Fahrenheit. b. Green - Indicates that the LCD screen is displaying the temperature in degrees Celsius. c. Blue - Indicates that the timer function is in use. 3.
Control Panel Celsius To switch from Fahrenheit to Celsius (or vice versa) press and hold the main power button for 5 seconds. The LCD screen will flash 5 times to confirm your settings. USING THE FLAME CONTROL Press the flame control button to cycle through the flame brightness levels. The default flame brightness setting is L3 (high) after powering on. USING THE TIMER FUNCTION The timer button is used to control the time of the flame and/or heater function.
Control Panel USING THE REMOTE CONTROL The remote control can be used up to 13 feet (4 meters) away from the heater, so long as there are no obstructions between the remote control and the heater. REMOTE CONTROL BATTERIES Press and slide the battery cover on the rear of the remote and remove the cover. Insert two new AAA 1.5V batteries into the battery compartment. Ensure that the polarity is correct. Batteries are not included in the package due to safety during transportation.
FCC/IC Information Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1). This device may not cause harmful interference, and (2). This device must accept any interence received, including interference that may cause undesired operation.
Troubleshooting Problem Power light is ON but the flame effect is not visible Excessive noise when the fireplace is operating Possible Cause(s) The fireplace is not operating correctly. Corrective Action Contact customer service. The fan is defective. Contact customer service. The fireplace assembly is defective. Warranty Information TURBRO provides a 1-year limited warranty for TURBRO Heater, from the date of purchase, subject to the following conditions and limitations outlined below.