Use and Care Manual

Warranty Registration
Safety Instructions
Thank you for purchasing a TURBRO Electric Fireplace!
We’re extremely happy that you have decided to join us.
To thank you we’re giving you a warranty extension. All you need to do is register your new product at
https://www.turbro.com/pages/warranty-registration. Once it’s registered, you’ll get a 1-year extension on the 1-year manufacturer
warranty for a total of 2 years. It’s that easy!
Tip for First-Time Use
When using this fireplace for the first time, or after a long period of storage, let the fireplace run for at least 15 minutes with the thermostat
set at the maximum heat level to remove the "new product" smell. This smell is because the fireplace absorbs moisture, creating an
odor similar to that of old leather. It will go away after a few minutes of use.
Please read the following instructions before attempting to assemble, operate, or install this product.
Do not use this product with missing, damaged, or broken legs.
Do not use this product outdoors. This product is for indoor use only.
This product is not intended for use in bathrooms, laundry areas, and similar indoor locations. Do not place this product where it may
fall into a bathtub or other water container.
This product is hot when in use. To avoid burns, do not touch surfaces with bare skin. If necessary, use handles when moving this
product. Keep combustible materials such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 ft from the product.
Do not use this product in an elevated location, such as on a shelf, raised platform, countertop, etc.
Do not run the power cord of this product under carpeting, throw rugs, runners, or similar items. Arrange the cord away from high-traffic
areas so that it will not be tripped over.
Extreme caution is required when the product is used near children or invalids and whenever the product is left operating unattended.
Do not operate this product with a damaged power cord or plug, after the appliance malfunctions, or the product is damaged. Any
repairs to this appliance should be carried out by a qualified service person.
Under no circumstances should this product be modified. Parts removed for service must be replaced prior to using this product.
Connect to properly grounded power outlets only.
Always plug the fireplace directly into a wall outlet. An extension cord, outlet, or power strip should never be used with this product.
This product, when installed, must be electrically grounded in accordance with local electrical codes. For the USA: National Electric
Code, ANSI/NFPA No. 70. For Canada: CSA C22.1 Canadian Electrical codes.
To disconnect this product, turn the product off from the control panel, then remove the power plug from the outlet.
Always unplug this product if you do not plan to use it for a long period of time.
Do not insert or allow foreign objects to enter any ventilation or exhaust openings as this may cause an electric shock, fire, or damage
to the appliance.