Manualshelf

Use and Care Manual

ManualsBrandsTURBRO ManualsElectric HeatersSuburbs 23 in. Black Freestanding Electric Fireplace Infrared Space Heater with Curved Door, Remote Control
12345678910
Control Panel
USING THE FLAME CONTROL
Press the flame control button to cycle through the flame brightness levels. The default flame brightness setting is L3 (high) after
powering on.
USING THE TIMER FUNCTION
The timer button is used to control the time of the flame and/or heater function. If the heater and/or flame effect are powered on when
you enter the timer adjustment mode, those settings will be under the control of the time you set.
Press the timer button repeatedly to cycle through the timer settings. The blue indicator light will power on once you have confirmed
a timer, and the LCD screen will flash 5 times to confirm your timer settings.
Celsius
To switch from Fahrenheit to Celsius (or vice versa) press and hold the main power button for 5 seconds. The LCD screen will flash
5 times to confirm your settings.