Product Manual

LCD ERROR MESSAGES
The thermometer incorporates visual diagnostic messages as follows:
‘Hi’ or ’Lo’
is displayed when the temperature being measured is outside of the settings of HAL and
LAL.
「 」 「 」
‘Er2’ is displayed when the thermometer is exposed to rap
id changes in the ambient temperature. ‘Er3’
is displayed when the ambient temperature exceeds 0
o
C (32°F) or +50
o
C (122°F).
The thermometer
should be allowed plenty of time (minimum 30 minutes) to stabilize to the working/room temperature.
「 」
Error 5~9, for
all other error messages it is necessary to reset the thermometer. To reset it, turn the
instrument off, remove the battery and wait for a minimum of one minute, reinsert the battery and turn
on. If the error message remains please contact the Service Department for further assistance.
「 」「 」
‘Hi’ or ’Lo’ is displayed when the temperature being measured is outside of the measurement range.
BATTERIES
The thermometer incorporates visual low battery indication as follows:
‘Battery OK’: measurements
are possible
‘Battery Low’: battery needs to be
replaced, measurements are still possible
‘Battery Exhausted’: measurements are not
possible
When the ‘Low Battery’ icon indicates the battery is low, the battery should be replaced immediately with AAA, 1.5V batteries. Please note:
It is important to turn the instrument off before replacing the battery otherwise the thermometer may malfunction.
Dispose of used battery promptly and keep away from children.
SPECIFICATION
Item Non-contact Infrared Scan function
Thermocouple Probe Scan function
(K type; probe not included.)
Measurement Range
-60 to +625
o
C (-76 to +1157
o
F)
-64 to +1400°C (-83.2 to +1999°F)
Operating Range 0 to +50°C (32 to +122°F)
Accuracy
(Tobj=15~35°C, Tamb=25°C)
±1.0°C (1.8°F)
+/-1% of reading or 1°C (1.8°F) whichever
is
greater (Test under Tamb=23±6°C)
Accuracy(Tamb=23±3°C)
Tobj=0~625°C:+/-
2% of reading or 2°C (4°F) whichever is
greater, Tobj= -60~0
o
C: +/-(2°C+0.05/degree)
Emissivity Range 0.95 default – adjustable 0.1 to 1 step .01
Resolution (-9.9~199.9°C) 0.1°C/0.1°F
Response Time (90%) 1sec
Distance:Spot 16:1(90% energy covered)
Battery Life Typ.180, min 140 hours continuous use (Alkaline, without Laser and Back Light.)
Dimensions 46.0 x 143.0 x 184.8mm(1.81×5.63×7.28 inch)
Weight 240 grams(8.5 oz) including batteries (AAA*2pcs)
Note: Under the electromagnetic field of 3V/m from 200 to 600 MHz, the maximum error is 10
o
C (18
o
F).