Product Manual

MACROSCOPE 60x INSTRUCTIONS
Focusing Instructions
The assembled MACROSCOPE 60 has two knurled focus adjustment knobs — one located at
the top (eyepiece) and the other located on the close—up attachment. The focusing procedure is
as follows:
1. Adjust the eyepiece focus knob (Top of Macroscope) until the reticle is as sharp as
possible disregarding the image of the object.
2. After the reticle is sharp adjust the close—up focus knob (Bottom of Macroscope) until
the image of the object is sharp.
With a few moments of practice, the procedure will become easier then reading these
instructions.
Measuring size of objects
The Macroscope 60X comes with a precise measuring reticle that also allows you determine the
size of an object under the Macroscope with the measuring reticle. Each line is a function of
size, not measurement.
Please use the following conversion formula for the size of an object:
Each line on scale = .02172 mm or .00083 inch
1 mm = 47 lines & 1/64 inch = 19 lines & 1/32 inch = 38 lines