Product Manual

Turf-Tec International Digital Moisture Sensor - Copyright 2011
Page 2 - www.turf-tec.com
Turf-Tec Digital Moisture Sensor - MS6-W
1. Step one, screw in probes- Do not over
tighten but be sure probes are very tight.
2. Wet area on green with irrigation water and
extend probes to 1 inch level.
3. Insert probes 3-4 times in soil to clean them
before use each day.
4. Insert into wet area on green at 1 inch level.
5. Press read button.
6. If reading over 100% - Adjust meter internally
until reading is at 100% to compensate for salts
and minerals in soil. (See instruction manual
page 5)
Readings
0-25% Dry
25-75% Ideal
75% - 100% Wet
(Over 100% - adjustment must be made to unit)