Product Manual

12
Temp Source: Choose Soil Sensor or IR Sensor
Temp Units: Choose Fahrenheit or Celsius.
Moisture Type: Choose volumetric water content
(VWC%), raw sensor reading (Period), or TDR 300 mode.
The latter will report a VWC that matches the output of
the TDR 300 meter (no EC optimization).
EC Units: Choose simple EC value (mS/cm) or the Salin-
ity Index (see p. 18).
Auto-Off: Choose how long the meter will stay on before
automatically powering off.
Current Date, Current Time: These are reported values.
They cannot be manually adjusted. This information is
acquired from the GPS signal.
Timezone: Choose the offset from Greenwich Mean
Time. As you change the offset, the Current Time and
Date will be updated.
Daylight Savings: Options are ON or OFF.
Calibration*: Initiates calibration sequence (see p. 13).
Factory Defaults*: Returns all meter settings to the facto-
ry default values. See p. 34.
* Pressing Select button for these options brings up an
additional screen.