Product Manual

Plug Popper - Soil Sampler with Foot Peg Ejector

The Plug Popper featuring a patented piston design that allows you to take a 1

1/2 inch x 4 inch deep plug with the stainless steel sampling tip. After the

plug is removed, simply push down on the ejection foot peg to eject the

sample. In addition to soil sampling, the probe can also be used to assist in

seedling planting and fertilizer tablet applications. The soil probe is

constructed of zinc-coated steel and stainless steel for durability and long life.

Overall Height is 50 inches tall. Take samples without ever bending over!

Simply place the stainless steel tip

against the top of the soil.

Place one foot into the stirrup

Withdraw the Plug Popper from the

soil.

Grasp the collar of

the Piston and

push the piston forward with your

foot to the tip. The soil sample will

POP out.

PLUGPOP-01-M - Plug Popper 1 1/2" diameter x 4 inches deep

PAGE 1
Plug Popper - Soil Sampler with Foot Peg Ejector The Plug Popper featuring a patented piston design that allows you to take a 1 1/2 inch x 4 inch deep plug with the stainless steel sampling tip. After the plug is removed, simply push down on the ejection foot peg to eject the sample. In addition to soil sampling, the probe can also be used to assist in seedling planting and fertilizer tablet applications. The soil probe is constructed of zinc-coated steel and stainless steel for durability and long life.
PAGE 2
Plug Popper - Instructions (Use Caution—Sharp Point) Unpack the handle and the tip. Place the plate at the top of the sampling tube against the bottom of the stirrup. Insert bolts from the bottom up so the bolt heads will be facing down when assembled. Bolt the sampling tube to the bottom of the stirrup with the bolts included. The Plug Popper is ready to go. USE (Use Caution—Sharp Point—Avoid pinching) After assembly, place the tip against the top of the soil. Place one foot into the stirrup.