Installation Instructions

1. Take out the parts from the hardware package
For Semi-Flush. (See Fig. 7)
2. Attach two screws to the mounting strap, and
secure it with two lock nuts. Adjust the length
of the screws if necessary. (See Fig. 7)
3. Attach the mounting strap to the outlet box by
using two mounting screws. (See Fig. 7)
4. Thread the fixture wires through the coupling,
hex nut, long nipple, big tube, cap, canopy,
metal pad, washer, grounding pad and another
hex nut. (See Fig. 7)
5. Secure the coupling onto the stem on the top
of the fan light. Then secure the long nipple into
the coupling, and secure it with a hex nut.
(See Fig. 7)
6. Slip the big tube, cap with the open side facing
downward and the canopy down through the
long nipple, secure them together with a metal
pad, washer, grounding pad and hex nut.
(See Fig. 7)
7. Slip the short nipple up through the pull chain,
and secure it into the coupling with hex nut.
(See Fig. 7)
8. Cut the redundant wires if necessary. Pull out the
outlet wires and the house grounding wire from
the outlet box. Connections wires: (See Fig. 7)
---Connect the black (hot) wire from fixture to the
black (hot) wire from power source.
---Connect the white (neutral) wire from fixture to
the white (neutral) wire from power source.
---Attach the fixture grounding wire to the
mounting strap with the green grounding screw.
Then connect it to the house grounding wire
with the wire nut.
Carefully put wires back into the outlet box.
9. Attach the fixture canopy to the mounting strap
by inserting the screws, and secure it with the
ball nuts. (See Fig. 7)
10. Slip the glass shade through the pull chain and
the short nipple, secure it with a rubber pad,
metel pad and hex nut. (See Fig. 7)
11. Slip the cover up through the pull chain and the
short nipple, secure it with finial. (See Fig. 7)
12. Turn on the electric circuit.
131011
Turn of the Century
TM
Outlet Box
House Grounding Wire
Wire Nut
Screw
Mounting Strap
Green Grounding Screw
Hex Nut
Grounding Pad
Washer
Metal Pad
Canopy
Ball Nut
Cap
Big Tube
Long Nipple
Hex Nut
Coupling
Lock Nut
Mounting Screw
Installing the fan light on the ceiling:
Fig.7.
hardware package For Semi-Flush
Fan Light
Coupling
Pull Chain
Cap
Glass Shade
Short Nipple
Rubber Pad
Hex Nut
Metel Pad
Hex Nut
Cover
Finial
LED 15W