Installation Instructions

For Ceiling Light: (See Fig.4 & Fig.5)
1. Take out the the hex nut, washer, two bolt nuts,
groudnig pad and canopy from the hardware
package for ceiling light.
2. Unscrew and remove the nipple(-a), coupling, washer
and the cap from the nipple(-a).( See Fig.4)
3. Attach the canopy with the open side facing upward
to the fixture by inserting the nipple(-c), then secure
it with a washer, grounding pad and hex nut.
4. Attach two screws to the mounting strap, then
secure them with two lock nuts. Adjust the length
of the screws if necessary.
5. Attach the mounting strap to the outlet box by using
two mounting screws.
6. Pull out the outlet wires and the house grounding
wire from the outlet box. Make wire connections
using the wire nuts:
---The black wire from fixture to the black wire from
the outlet box.
---The white wire from fixture to the white wire from the outlet box.
---Attach the fixture grounding wire to the mounting strap with the green grounding screw. Then
connect it to the house grounding wire with a wire nut.
Carefully tuck the wires back into the outlet box.
7. Attach the canopy to the mounting strap by inserting two screws, then secure them with the bolt
nuts.
8. Follow steps 7~9 as for Light Kit.
Outlet Box
House Grounding Wire
Fixture Grounding Wire
Wire Nut
Screw
Mounting Strap
Green Grounding Screw
Lock Nut
Mounting Screw
Mounting Parts for Ceiling Light
Fig.5
Hex Nut
Grounding Pad
Washer
Canopy
Bolt Nut
Fixture
Nipple(-c)
Washer
Coupling
Nipple(-a)
Nipple(-c)
Fixture
Cap
Fig.4
LK33012 --- Page 2
060217
TM