Installation Guide

FIGURE - 1 FIGURE - 2 FIGURE - 3
Sink is placed upside down on the counter-top mounting area. The outer
The sink is removed from the mounting
3- The bench is cut on the inside marking
edges are drawn all around and marked on the counter. area and a second line is drawn 15 mm inside the marked line.
FIGURE - 4 FIGURE - 5 FIGURE - 6
The waste outlet is mounted on the sink Silicone is applied to the mounting area of the The sink is placed in the cut-out countertop.
bench countertop. The surplus silicone is cleaned off
and left to stand for 24 hours before use.
Inset Sink Installation Instructions