User Manual

How to get more accurate readings for current, voltage and rpm:
The ESC measures accurate values for current, voltage and rpm (as far as I can see).
It is the program that outputs these values wrong, and for current it is WERRY wrong!
For your information I use the software downloaded from HiFei.com (version 4.11)!
Open notepad as ADMINISTRATOR.
Use notepad to open cinfig.ini (for me it was located at C:\Program Files (x86)\HiFei V4.11).
You will now see alot of configurable values. First there is some global values for the program itself, most
here is selfexplainable and can be changed from within the program.
[communicateset]
port=4
[display]
yaxis=1
color0=204
line0=1
color1=65280
line1=1
color2=16711680
line2=1
color3=39423
line3=1
color4=13369548
line4=1
color5=0
line5=1
color6=0
line6=1
color7=0
line7=1
n0=5
n1=2
n2=1
n3=3
n4=1
n5=1
n6=1
n7=1
[default]
hardware=152V
gearrate=1
polnumber=2
The only value I changed was the polnumber from 2 to 14, so I dont have to change this inside the program
every time I download the log (if your motor has 10 poles, then change this to 10).