User Manual

I will now go into details for Super Brain 80A as that is what I use myself (12MB).
[12MB]
kvalue0=0.142
cvalue0=0
kvalue1=0.4
cvalue1=5
kvalue2=0.4
cvalue2=0
kvalue3=3.69
cvalue3=-719
kvalue4=0.0000001227
cvalue4=1
valmin=0
valmax=30
curmin=0
curmax=120
description=Hifei KingKong 80A-K-6S 2-6S Lipo 3.5A SBEC 80A continuous current
This is my personal understanding of how these behave:
«kvalue» is the multiplier and «cvalue» is the start point.
0 is for voltage.
1 is for current.
2 is for throttle.
3 is for temperature.
4 is for rpm.
You dont need to change «valmin», «valmax», «curmin», and «curmax», don't know what they are.
«description» can be changed to i.e. «Turnigy Super Brain 80A 2-6S Lipo 4A SBEC».
As you can see the cvalue for current is 5, that means the LOWEST possible current the graph will show you
is 5A and for every increase in the current the graph will multiply it with the kvalue 0.4 resulting in way to
low current, and it is getting worse at higher currents.
I will now provide my personal configuration that I have tested for hours using wattmeter and Eagle Tree v3
logger with brushless rpm sensor for comparement. I do belive this config is within 5%, and way more
accurate than the original. Note that values for throttle is most likely not the same for you as for me, I use JR
x9303 and AR6200. Also note that I have only tested this up to about 45A using 3s and 4s lipo.
[12MB]
kvalue0=0.145
cvalue0=0
kvalue1=0.68
cvalue1=2.2
kvalue2=0.42
cvalue2=-6.3
kvalue3=3.69
cvalue3=-719
kvalue4=0.0000001215
cvalue4=1
valmin=0
valmax=30
curmin=0
curmax=120
description=Hifei KingKong 80A-K-6S 2-6S Lipo 3.5A SBEC 80A continuous current