C 150 Accucel 150W 10A Smart Battery Balance Charger Instruction Manual
TABLE OF CONTENTS INTRODUCTION 02 SPECIFICATION 03 CAUTION and NOTES 04 BATTERIES INFO and MAX CHARGE CURRENT 05 PROGRAM OF LiIon/LiPo/Lilo/LiFe/LiHV 07 WORKING INTERFACE 08 PROGRAM OF NiMH/NiCd 09 WORKING INTERFACE 10 PROGRAM of PB(lead-Acid) 11 WORKING INTERFACE 12 PROGRAM OF USER SETTINGS 13-14 PROGRAM OF EXTRA FUNCTION 15 PROGRAM OF LOAD MEMORY 16 ERROR INFORMATION 17 SUPPORT AND SERVICES 18 1
INTRODUCTION Thank you for purchasing the Accucel 150W 10A Touch charger. Designed for both rookies and professionals, this system is extremely versatile for the safety and the best use of your system, please read this manual carefully. Dec/inc To select sub program To alter the value 1602 LCD screen Start/enter To resume or start the operation USB (5V 2.1A) PC Link Temp.
SPECIFICATION Product Model: Accucel 150W 10A Smart Battery Balance Charger AC Input Voltage 100-240V DC Input Voltage 11-18V Charge power 150W Charge current 0.1-10A Discharge current 0.1-2A LiIon/LiPo/Lilo/LiFe/LiHV 1-6cells NiCd/NiMH 1-15cells Pb 2-20V Smart Battery I/II/III Net weight 0.
CAUTION AND NOTES This charger is ONLY suitable for charge rechargeable LiPo, LiFe, LiHV, NiCd, NiMH, Smart and Pb batteries. Do not attempt to charge dry cells, charge other types of batteries may cause fire or explosion. Set up the Input Power Limit/Low Input VOLT Cutoff correctly in the USER SETTING of the DC power supply. Pay attention to the charger during use. Do not leave the charger unattended. Never charge the dead or damaged batteries.
BATTERIES INFO and MAX CHARGE CURRENT Battery Type LiHV LiPo LiIo LiFe NiMH / NiCd No. of Cells Rated Voltage (V) 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 7 8 3.8 7.6 11.4 15.2 19.0 22.8 3.7 7.4 11.1 14.8 18.5 22.2 3.6 7.2 10.8 14.4 18 21.6 3.3 6.6 9.9 13.2 16.5 19.8 1.2 2.4 3.6 4.8 6 7.2 8.4 9.6 5 Charger Current (A) 0.1 - 10.0A 0.1 - 10.0A 0.1 - 10.0A 0.1 - 10.0A 0.1 - 10.0A 0.1 - 10.0A 0.1 - 10.0A 0.1 - 10.0A 0.1 - 10.0A 0.1 - 10.0A 0.1 - 10.0A 0.1 - 10.0A 0.1 - 10.0A 0.
Battery Type NiMH / NiCd Pb Charger Current (A) No. of Cells Rated Voltage (V) 9 10 11 12 13 14 15 1 2 3 4 5 6 7 8 9 10 10.8 12 13.2 14.4 15.6 16.8 18 2 4 6 8 10 12 14 16 18 20 0.1 - 10.0A 0.1 - 10.0A 0.1 - 10.0A 0.1 - 10.0A 0.1 - 10.0A 0.1 - 10.0A 0.1 - 10.0A 0.1 - 10.0A 0.1 - 10.0A 0.1 - 10.0A 0.1 - 10.0A 0.1 - 10.0A 0.1 - 10.0A 0.1 - 10.0A 0.1 - 10.0A 0.1 - 10.0A 0.1 - 10.0A 11 12 22.0 24.0 0.1 - 10.0A 0.1 - 10.0A LiPo Voltage Level : 4.2V/Cell Max Charge Voltage : 3.
PROGRAM OF LiIon/LiPo/Lilo/LiFe/LiHV Press +/- to shift the work modes between the battery and the charger. Press ENTER to select Press STOP to quit BALANCE CHARGE: With this mode, the charger will charge the battery to the termination voltage and balance each cell of the battery pack. Balance port of the battery must be connected. CHARGE: With this mode, the charger will charge the battery to the termination voltage by CC-CV mode, and stop at 1/10 of setting current.
WORKING INTERFACE 8
PROGRAM OF NiMH/NiCd CHARGE: With this mode, the charger will automtically detect the cell count of the battery and charge the battery to the termination voltage. DISCHARGE: With this mode, the charger will discharge the battery to the termination voltage. CYCLE: With this mode, the charger will charge and discharge the battery by the user’s setting.
WORKING INTERFACE 10
PROGRAM OF PB(Lead-Acid) 11
WORKING INTERFACE 12
PROGRAM OF USER SETTINGS 13
PROGRAM OF USER SETTINGS 4150-4250 4300-4400 4350 3100-3950 3300 Default 14
PROGRAM OF EXTRA FUNCTION 15
PROGRAM OF LOAD MEMORY 16
ERROR INFORMATION 17
SUPPORT AND SERVICES WARRANTY Hobbyking provide a period of one year product warranty from the date of purchase. The warranty only applies to material or operational defects, which are present at the time of purchase. During that period we will repair or replace free of service, charge for products deemed defective due to those causes.