User Manual TURNIGY JUMP STARTER T13 CAPACITY: 20000mAh/ OR 5500mA@11.
Operating Instruction: Charging the Device 1. Insert the AC adapter into socket; 2. Insert the adapter plug into 15V input port of the device. (Use only adapter charger supplied with this model) Car Charging 1. Insert one end of car charger into the jack of the cigarette lighter. 2. Insert the other end of car charger into the device. Starting 12V Vehicle 1.
2. Insert the devices connector into the 12V jump starter port; 3. Clamp positive terminal of the battery with Red clip, negative terminal of the battery with Black Clip; 4. Turn the ignition and start the vehicle; 5. Once the vehicle has started, remove the clamps from the car battery.
Charge Digital Products with USB Output Charge 12V/16V/19V Laptop 1. Selecting suitable charge connector of laptop and connect it. 2. Press the switch once to start the power. 3. Press the switch to select the suitable voltage to charge the laptop. The LED will blink with different voltage selected. The voltage will be locked in 3 seconds after chosen. 4. Connecting the computer’s connector with power source in 15 seconds, the computer can be charged. 5.
How to Turn on the Emergency Light 1. Press the power switch once and start the device; 2. Press the switch for 3 seconds, the LED lighting system is turn on; 3. Press the switch again and LED light is turn on; 4. Press the switch again, the LED change to SOS signal; 5. Press the switch one more time, the LED light is turned off.
Intelligent Safety Clamp Clamps Indicator Lights • STAND BY: BLUE • WARNING / FAULT: RED • REVERSE POLARITY: RED FLASHING • READY TO START: GREEN • OUTPUT SHORT CIRCUIT PROTECTION: NO LED SIGNAL OVER HEAT PROTECTION: • ACTIVATE WHEN BATTERY CELLS OR INTELLI-CLAMP REACHES 70 DEGREES CELSIUS, RESUME OUTPUT WHEN TEMPERATURE OF CELLS COOLS DOWN TO BELOW 50 DEGREES.
Trouble Shooting: If the following operations are unable to troubleshoot, please stop using the jump starter and contact with the stores which you bought the jump starter from Trouble Cause Solution The power capacity of the device is shown in 100%, but did not fully charged in charging process The indicator light of the device indicates four lights on means stop charging, and this situation means it is semi-state of charge, which is conducive to long-term storage when the device is not in use for long
Frequently Asked Questions (FAQ): 1. Q: How to turn off the device? A: This device has function of intelligent detection, in the case of no load or the charging completed, it will power off automatically, which could prevent power loss and make service life longer. 2. Q: How long does it take to charge this device fully? A: It takes 3 - 5 hours to fully charge the device using the 12V/1A or 15V/1A charger our company equipped. 3.
Current return charging protection Voltage stabilization protection Short circuit protection Overload protection Wide temperature ignition Balanced charge Over dischange protection Quality commitment Standard: GB/T 18287 - 2000 2 million Dollars sum insured Our product’s quality is underwritten by Hobbyking 9
Warranty Card We offer 12-month warrantly service for the product from tha date of purchasing. Warranty conditions: Please show this warranty card and fill in the details to obtain warranty service. We offer 12-month warranty for the product from the date of purchase. Warranty range: Quality problems in the state of normal use can be guaranteed. Damages to the product caused by the operational errors, Warranty can’t be provided. The device is dismantled, no warranty.
