5A (8-40v) SBEC for Lipo

SWITCHING BATTERY EMULATION CIRCUIT (SWITCHING BEC)

SPECIFICATION

Input Protection:

Input Voltage:

Model SBEC26:

Model SBEC40:

Model SBEC60:

Output Voltage:

Output Current:

Reverse Polarity Protection

8-26V

8-40V

8-60V

SV or 6V (selectable)

SAmaximum

SETUP AND CONNECTION

1. Connect the battery. Make sure the polarities are correct. (Red

+ ,

Black -)

2. Make sure the polarities are correct when inserting output connector to the receiver.

BATTERY

J~CK.

MOTOR

ANTENNA

RECEIVER

f-----,

Throttle

Servo 1

Servo 8

Fig 1

CAUTIONS

- Incorrect polarities at the output connection can damage the receiver, servo, ESC and battery.

- For ESC that already come with a BEC: remove the SV output pin (red color wire) from the

middle of the throttle connector before using the SBEC.

PAGE 1
SWITCHING BATTERY EMULATION CIRCUIT (SWITCHING BEC) SPECIFICATION Input Protection: Input Voltage: Model SBEC26: Model SBEC40: Model SBEC60: Output Voltage: Output Current: Reverse Polarity Protection 8-26V 8-40V 8-60V SV or 6V (selectable) SA maximum SETUP AND CONNECTION t1. Connect the battery. Make sure the polarities are correct. (Red + , Black -) 2. Make sure the polarities are correct when inserting output connector to the receiver. BATTERY MOTOR J~CK.
PAGE 2
FERRITE CORE (Enlarged Size) ~ Fig 2 Put the wire through the ho le of the ferrite core and make five turns per Fig 2. Jumper setting for selection of SV / 6V.