User Manual

DualBoard 11
Connecting the Video Projector
TIP
For optimal usage and viewing, the minimum
required screen resolution should be set at 1024 x
768.
1
With the computer turned on, connect the
projector video cable from the computer to the
video projector.
2
Turn on the video projector.
3
With the video projector aimed at the DualBoard, align the
projected image onto the DualBoard so that it is within
the board’s active area.
TIP
It is recommended to leave a 3 cm (30 mm)
perimeter.
Turning on the DualBoard
1
Connect the AC/DC power adapter to the DualBoard controller box.
2
Plug the opposite end of the AC/DC power adapter into a
wall outlet.
3
Press the power switch on the right side of the board.
A beep indicates that the board has power.
Connecting the DualBoard via USB
1
Turn on your computer.
2
Connect the USB cable to the DualBoard controller box located on the back of the board. The controller box is located
on the bottom right of the board, if the board has already been hung up.
3
Attach the other end of the USB cable into a working USB port on your computer.
Device Manager establishes connection with the DualBoard.
turningtechnologies.com/user-guides