Manual

Mobi 360 31
Asking ExamView Questions
You can use the Mobi 360 to ask an individual ExamView questions during instruction.
The entire ExamView file will open. If the question you want to ask is not at the beginning of the file, use the Scroll Left and
Scroll Right buttons on the Mobi 360 to navigate to the applicable question.
If the ExamView test file contains questions that are not supported by the student response system (such as Short Answer for
Spark 360 or Essay for Pulse 360/Spark 360), the Start button will not be enabled on those questions. However, you can still
use the material as background to ask a Verbal question instead.
If an ExamView question has been authored as a dynamic question, you can use the Recalc button to present the question
with new variables and new answer options.
1
From the Lesson Zone, tap Question.
2
Tap the ExamView question tab.
3
Tap the ExamView icon to open an ExamView test.
4
Find and tap an ExamView file that you have placed in Favorites.
The ExamView test opens on your desktop.
NOTE
To start an ExamView question not in Favorites, use the digital pen as a mouse pointer to browse
for an ExamView file.
5
To set the timer, tap Timer. Tap Plus or Minus to set the timer with more or less time.
6
Tap Start.
7
When students are finished answering the question, tap Stop.
8
To show the ExamView feedback, use the digital pen as a mouse pointer and click Feedback on the ExamView
question slide.
9
To advance to the next ExamView question, tap the Scroll Right icon above Start on the Mobi 360.
10
If the Recalc button is enabled, you can tap this button to present the same question with new variables and answer
options.
Timing Student Questions
The default setting for the Question Zone timer is off. You can use the timer to time any Verbal, Tagged or ExamView question.
1
Tap Timer to turn on the timer. Tap again to turn off the timer.
The default time is one minute, 30 seconds (1:30). You can increase or decrease the allotted time in 15 second
increments.
2
Tap Plus to increase time. Tap Minus to decrease time.
NOTE
The new allotted time becomes the new default time for the duration of the class session.
3
When Start is clicked, the timer is displayed at the top of the Mobi 360 screen.
When the timer ends, students cannot enter answers on their student devices. To allow students to finish answering the
question, tap Resume.
turningtechnologies.com/user-guides