PresenterCard User Guide 1.
PresenterCard 2 © 2014 Turning Technologies, LLC. All rights reserved. Portions Responsive Innovations, LLC, Microsoft Corporation No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Turning Technologies, LLC. All rights reserved. Turning Technologies, LLC, 255 West Federal Street, Youngstown, OH 44503 USA. TurningPoint® is a registered trademark of Turning Technologies, LLC.
PresenterCard 3 TABLE OF CONTENTS About PresenterCard System Requirements Changing the PresenterCard Channel PresenterCard Button Functions TurningPoint Cloud Pairing PresenterCard with TurningPoint Cloud Configuring the PresenterCard Programmable Buttons TurningPoint 5 Pairing PresenterCard with TurningPoint 5 Configuring the PresenterCard Programmable Buttons TurningPoint 2008 Pairing PresenterCard with TurningPoint 2008 Configuring the PresenterCard Programmable Buttons TurningPoint AnyWhere PC and Mac
PresenterCard 4 ABOUT PRESENTERCARD PresenterCard is a radio frequency hardware clicker that interacts with Turning Technologies polling software allowing presenters mobility in the classroom. Additionally, presenters have the ability to customize the device to their needs. System Requirements The following requirements are necessary for PresenterCard to properly function: One of the following receivers: l RRRF-02 receiver - 4.6 firmware or higher l RRRF-03 receiver - 2.
PresenterCard 5 PresenterCard Button Functions The table below defines each programmable button on the PresenterCard. Button TurningPoint Cloud/5/2008 TurningPoint AnyWhere PresenterCard Programming The Start/Stop button is used to open/close polling. The Start/Stop button is used to N/A open/close polling. The Back button is used to move backwards through a slide deck. The Back button is used to move backwards through a slide deck.
PresenterCard TURNINGPOINT CLOUD This chapter covers: Pairing PresenterCard with TurningPoint Cloud Configuring the PresenterCard Programmable Buttons Pairing PresenterCard with TurningPoint Cloud 1 Open TurningPoint Cloud and sign in to your Turning Account. 2 Select Preferences from the Dashboard. 3 Select Connections from the left navigation pane. 4 Scroll to PresenterCard in the right navigation pane. 5 To the right of PresenterCard Device ID, click Change.
PresenterCard TURNINGPOINT 5 This chapter covers: Pairing PresenterCard with TurningPoint 5 Configuring the PresenterCard Programmable Buttons Pairing PresenterCard with TurningPoint 5 1 Open TurningPoint 5. 2 Select Preferences from the Dashboard. 3 Select Connections from the left navigation pane. 4 Scroll to PresenterCard in the right navigation pane. 5 To the right of PresenterCard Device ID, click Change. 6 Press any button on the PresenterCard to pair it with TurningPoint 5.
PresenterCard TURNINGPOINT 2008 This chapter covers: Pairing PresenterCard with TurningPoint 2008 Configuring the PresenterCard Programmable Buttons Pairing PresenterCard with TurningPoint 2008 1 Open TurningPoint 2008. 2 Click Tools on the TurningPoint toolbar and select Settings. 3 Select Response Device from the left navigation pane. 4 Scroll to PresenterCard in the right navigation pane. 5 To the right of PresenterCard Device ID, click [None].
PresenterCard TURNINGPOINT ANYWHERE PC AND MAC This chapter covers: Pairing PresenterCard with TurningPoint AnyWhere PC and Mac Configuring the PresenterCard Programmable Buttons Pairing PresenterCard with TurningPoint AnyWhere PC and Mac 1 Open TurningPoint AnyWhere PC or Mac. 2 On the PC launchpad, click Settings. On the Mac launchpad, click Preferences. 3 Select Response Devices from the left navigation pane. 4 Scroll to PresenterCard in the right navigation pane.
PresenterCard 10 CONTACT US For additional help, contact Turning Technologies Technical Support. Technical Support is available from 7 a.m. - 9 p.m. EST. From within the contiguous United States, you can reach Technical Support toll-free by calling 866.746.3015. If you are calling from outside of the United States, please call +1 330.746.3015. Technical Support may also be reached via e-mail at support@turningtechnologies.com or support@einstruction.com, a brand of Turning Technologies.