Owner manual

PresenterWare 10
PRESENTERWARE FOR TURNINGPOINT
ANYWHERE
Configuring PresenterWare for TurningPoint AnyWhere
The following settings must be configured in order for PresenterWare to connect to a TurningPoint AnyWhere session.
1
Open TurningPoint AnyWhere.
2
Click Settings/Preferences from the launchpad.
3
Select Response Devices from the left panel.
4
Scroll to the PresenterWare section in the right panel.
5
Change the Enable PresenterWare Support drop-down menu to True.
6
Enter the network port number in the PresenterWare Port field. The default port is 6090.
7
Optionally, enter the presenting computer’s Bonjour Name.
TIP
To learn more about Bonjour zero-configuration, visit http://www.apple.com/support/bonjour/.
Connecting the PresenterWare Device
PresenterWare is able to connect to the session once the configuration in TurningPoint AnyWhere is complete. The steps
below will establish a connection between PresenterWare and TurningPoint AnyWhere.
1
Open the PresenterWare application.
2
Enter the presenting computer’s Host (IP address) by expanding the + icon
in the upper right corner of the application.
l Manually entered Hosts are displayed under Manual Hosts. To enter
a Manual Host, select the + icon and enter the presenting computer’s
Host. The presenting computer’s Host (IP address) can be found in
Settings under PresenterWare.
l Hosts running Bonjour are displayed under Discovered Hosts.
3
Tap the Host or Bonjour Name associated with the presenting computer.
l A challenge code is displayed on the device when connecting to a
Host for the first time.
4
On the PC launchpad, click Poll. On the Mac menu bar, click Window.
turningtechnologies.com/user-guides