Revision History: Rev Date Description A 12/21/2015 Initial Draft USER MANUAL RCQR02 RF Module
Table of Contents 1.0 RCQR02 RF MODULE ........................................................................................................................................ 3 1.1 DESCRIPTION ........................................................................................................................................................ 3 1.2 FCC, IC COMPLIANCE INFORMATION .................................................................................................................. 3 1.
1.0 RCQR02 RF Module 1.1 Description The RCQR02 is a low power wireless response keypad module. The RCQR02 module is used to interact with an audience so they can provide real time feed back to questions. It communicates at 2.4GHz, GFSK to a base station. The overall operation of the RCQR02 module is controlled by a single chip microcontroller-transceiver IC. This microcontroller-transceiver is powered from approximately 3V and uses a 16MHz reference.
1.4 FCC/IC Compliance Changes or modifications to the device that are not approved by the manufacturer could void the user’s authority to operate the device. This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference and (2) this device must accept any interference, including interference that may cause undesired operation of the device.