User guide

RemotePoll 14
Setting Description
Force Channel Change
When set to True, Force Channel Change allows users to retain the
channel as set in the ResponseCard channel settings. If set to False,
the channel will default to the last used channel on the
ResponseCard receiver.
Language
This setting allows users to define the language in which RemotePoll
is displayed.
Receiver
When a ResponseCard receiver is plugged into the presenter’s
computer, the serial number and firmware version are displayed.
Using the drop-down menu, the receiver channel can be changed.
How to use RemotePoll...
1
Open a presentation in TurningPoint 2008. Reset the session if necessary.
WARNING
Resetting the session will terminate the current ResponseWare connection. If the session needs
reset, login to a new ResponseWare session and update the remote location computer(s)
accordingly.
2
Launch the presentation into slide show mode.
3
Participants in the remote location(s) will see the first question appear in the RemotePoll window:
4
Run the session in TurningPoint 2008 as normal. Save the session when complete.
5
Optionally, click Save Session to save a backup of the session.
turningtechnologies.com/user-guides