Instruction Manual

TurningKey User Guide 16
Standards
2 Select either the K-12 Standards tab or the Custom Standards tab.
3 Select the test version to apply the standards to from the Current Version drop-down menu.
4 Select the question in the left panel.
5 Select a standard from the list.
6 Select the right arrow button (>) to assign the standard to the question.
The standard displays in the list of current standards on the right side.
Remove a standard using the left arrow button (<).
7 Repeat steps 3 - 6 to add standards to additional questions.
To start over, select the Clear All button to clear all standards from every question in the question list.
8 When finished assigning standards, click Close.
Note
You can assign multiple standards or use multiple
Standards Lists.