Owner manual

TurningPoint for Office 2007 User Guide 26
Step Two: Set Up the Response Devices
TurningPoint is now ready to accept responses from the response devices. You can magnify the
responses by placing a check mark in the box next to Magnify Values.
Polling Test: Magnify Responses
4 Press a key on each response device to be used.
TurningPoint displays the Device ID, Channel, and the key entry from each response device in the order
in which they were tested.
Polling Test: Response Device Test
5 Click End Test.
6 Click Done.
The response device testing is now complete.