Operation Manual

5
Pairing the Headset and Transmitter / Couplage du casque
et de l’émetteur / Pairing zwischen Headset und Transmitter
1
2
3
Step 1:
Make sure the Headset is OFF.
(The LED on the Headset should be OFF)
Step 2:
Press and hold the POWER button on the
Headset for more than 6 seconds. A tone
will sound and the LED on the Headset will
begin to blink rapidly.
Step 3:
Press and hold the PAIR button on
the Transmitter for 3 seconds.
The LED on the Transmitter will begin to
blink rapidly.
After a few seconds, the Transmitter LED
will be solid and the Headset will be paired.