Table of Contents About the P11 Headset The Ear Force P11 amplified headset gives serious gamers competitive edge by combining chat and stereo game sound into an immersive audio experience. PS3™ Setup (HDMI video) pg. 1 PS3 Setup (composite video) pg. 3 PS3 Audio Settings pg. 5 PS3 Chat Settings pg. 6 Using the Amplifier pg. 7 PC/Mac Setup pg. 9 Important Safety Information pg.
Connecting the P11 to a PS3 (HDMI Video) Step 1: Connect the (red/white) audio cables from the PS3 AV cable to the P11 splitter cable (red/white). 3 (PS3 AV cable) 2 (green) 1 Step 2: Connect the P11 audio cable (green) to the splitter cable input (green). Step 3: Insert the P11 USB/Power connector to an open USB port on the PS3 console. Step 4: Configure PS3 Audio and Chat Settings (see page 5) (red/white) Note: The HDMI cable does not affect the setup or audio of the P11 headset.
Connecting the P11 to a PS3 (Composite Video) Step 1: Connect the (red/white) audio cables from the PS3 AV cable to the P11 splitter cable (red/white). Step 2: Connect the P11 audio splitter cable (red/white) to the stereo audio input (red/white) jacks on your TV. You will be able to hear the game audio on the TV as well as the P11. (Optional) The connection to your TV is optional and only used if you want to hear sound on the TV and headset at the same time.
Configuring the PS3 Chat Settings Configuring the PS3 Audio Settings Analog Step 1 After powering on the PS3, go to “Settings” > “Sound Settings” > “Audio Output Settings”. Step 2 Select ” Audio Input Connector / SCART / AV Multi” to send the audio output to the P11. Audio Output Settings Select the connector on the TV or AV amplifier (receiver). Step 1: After powering on the PS3, go to “Settings” > “Accessory Settings” > “Audio Device Settings”.
Using the Amplifier ON MIC MUTE 1 GAME 2 3 1 — Mic Mute Switch Enables/disables the chat microphone. 2 — Mic Mute LED LED turns green when mic is active and red when muted. CHAT 3 — Game Audio Volume Sets the level of the stereo game audio. 4 4 — Chat Volume Sets the level of chat audio from other players.
Connecting the P11 to a PC or Mac® Step 1: Connect the P11’s green 3.5mm audio plug to the speaker or headphone output of your PC/Mac sound card. Step 2: Insert the P11’s USB/Power connector to an open USB port on your PC/Mac to power the headset/amplifier. When used as a computer gaming headset, the P11 functions as two independent headsets in one package: Amplified Stereo Headphones: The green 3.
Safety Notice To avoid potential damage to the device, always disconnect all cables before transporting it. WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods of time, so it is important to keep the volume at a safe level. Over time, your ears adapt to loud volume levels, so a level that may not cause initial discomfort can still damage your hearing.