Operation Manual

22
Go to Table of Contents
Speaker plates
Your Marvel SEVEN headset comes with one set of interchangeable limited edition MARVEL Thor Plates. Your MARVEL
SEVEN headset speaker plates may be removed and replaced with other speaker plates according to your preference. To
purchase additional speaker plates, visit: www.turtlebeach.com/products/accessories/speaker-plates. Limited edition
themed speaker plates may also be available from time to time.
Troubleshooting
Microphone not working.
- Make sure the headset is plugged securely and completely into the inline amplifier until it clicks (see page 7).
- Disconnect the microphone boom, then reconnect it as described in “Initial Setup”. If the mic boom is loose, this can
cause intermittent mic connection, or cause others to hear unwanted crackling sounds.
On Windows PC or Mac, the Game, Bass, and Treble controls appear inactive.
- Make sure both the USB and 3.5 mm plugs are connected to your computer, and your audio settings are configured
correctly (see PC setup instructions on page 17, and Mac setup instructions on page18).
One speaker not working.
- Make sure the headset is plugged securely and completely into the InLine amplifier until it clicks (see page 7). A
loose connection can cause either or both of the speakers to stop playing audio.
- Test the headset by disconnecting it from the In-Line amplifier, and instead connect it to a portable music player and
play a track. If you still hear problems in audio playback, then contact our support team at the web address below.
To submit a Technical Support request, please visit:
http://www.turtlebeach.com/contact-support