Operation Manual

SURROUND

ANGLES

SURROUND

ON/ OFF

PAIR

X42 Transmitter

Digital Input LED: This LED turns on when a digital input signal is

detected. When this LED is ON, the analog input is turned off.

Surround Sound LED: The LED will light whenever the digital input is

being processed by the surround sound decoder.

Dolby Digital LED: The LED will light whenever a Dolby Digital

encoded signal is detected on the digital input.

Power/Link LED: The LED is on solid when the transmitter is

communicating with the headset. A slowly pulsing LED indicates

that the transmitter can’t communicate with the headset. This could

happen when the headset is turned off, out of range or not paired with

the transmitter. (see pgs. 3-4)

Digital Input and Output: Connect the digital input to the Xbox 360

digital output using the included digital optical cable. The digital input

is passed through to the digital output so you can connect the X42

transmitter and your home theater system to hear the Xbox sound on

the headset and speakers at the same time. When a digital signal is

detected by the optical input, the Digital Input LED will be lit.

Analog Input Jack: Provides a 3.5 mm input for digital music players

or additional audio sources. (3.5 mm cable sold separately)

NOTE: The analog input is deactivated whenever a digital input is active, so

both the digital and analog inputs cannot be used at the same time.

Pair Button: Press and hold to activate pairing mode. (See pg. 4)

Surround Sound Angles Button: Press to select different HRTF

surround angles. (See pg. 13)

Surround Sound On/Off Button: Pressing this button toggles between

surround sound and stereo sound. When surround sound is active,

the Surround Sound LED will be lit.

Basic Stereo Mode: Downmixes the audio to stereo and disables all

audio effects. To enter Basic Stereo Mode, press and hold Surround

ON/OFF + Speaker Angles while powering on the transmitter.

1 2 3 4

7 8 9