Operation Manual

7
Go to Table of Contents
Setup and Connections: Xbox One Consoles
The Ear Force XO SEVEN headset is supplied with a convenient Headset Adapter that plugs directly into the
Xbox One controller (not supplied with the headset). The adapter places game volume, chat volume and mic mute
controls right where your thumbs can operate them.
 UpdatingtheXboxOnecontrollerrmware
 TousetheadapterwithanXboxOnecontroller,yourstneedtoupdatethecontrollerrmware.Performthe 
following steps.
1. Makesureyourconsoleisonandyou’resignedinandconnectedtoXboxLive.
Note: It’s important to connect to Xbox Live because your console will need the latest system update,
which contains the newest controller software. If you’ve connected recently, your Xbox One is probably
already up to date, but you should connect anyway just to be sure. If your console needs an update, you’ll
be prompted to install one.
2.Openthebatterycompartmentonthebackofthecontrollerandremovethebatteries.
3. Plug the Headset Adapter into the bottom of your controller.
4. Plug in your XO SEVEN (a headset is required to be plugged in so the adapter will turn on).
5. Plug the big end of the included USB cable into the port on the side of the console.
6. Plug the small end of the USB cable into the top of the controller.
7. Instructions to install the update should automatically be displayed. Follow the instructions, and don’t disconnect
the USB cable while the update is in progress.
8. When the update is complete, unplug the USB cable and put the batteries back into your controller.
9. Press the Xbox button on the Wireless Controller to turn it on. Your controller is now up-to-date, and you’re ready
to use your Xbox One Headset Adapter.
Note: You only need to update your controller one time, but if you plan to use the Headset Adapter with
other Xbox One Controllers, you’ll need to do this process for each controller, always make sure that all
 connectionsarermlyinserted.