Owner's Manual

18
Adjusting Sound
If you want to… Then..
Adjust volume.
Adjusting Sound
Turn the microphone on or off.
Use the Bluetooth Volume Up and Down buttons.
Press the Mic Mute button. To turn the microphone on again,
press the Mic Mute button.
Turn Active Noise Cancellation
(ANC) on or off.
· When the headset is on, press the Power/ANC Button.
The Status LED will flash Red.
· To turn off ANC, press the Power/ANC Button again.
The Status LED will flash White.
If you want to… Then...
Optimize the sound.
Control the mic sound. The dual mic array of the i30 enables precise audio pickup without
a mic boom in front of your mouth. It also provides special audio
effects that you can cycle through using the Mic Settings button.
Mic 1 Flat
Mic 2 High Morph uses the dual mic array to create
a chipmunk-like sound
Mic 3 Low Morph uses the dual mic array to create
a monster-like sound
Mic 4 Voice Reverb
The Audio Preset Up and Down buttons cycle through the following
modes, each of which is confirmed by voice announcement.
Preset 1 Flat equalization, for the most accurate sound
Preset 2 Bass boost, for the extreme low frequencies
Preset 3 Treble boost, for the extreme high frequencies
Preset 4 Bass and treble boost