Owner's Manual

23
Bluetooth Setup and Operation
Dual Pairing
The i60 can be simultaneously paired to two Bluetooth-enabled devices at once. For example, you can pair the i60 to a
digital music player or tablet and your mobile phone at the same time. If your mobile phone is also a digital music player,
you can stream music to your headset as well. The i60 will automatically remember the last two paired devices upon
powering on.
NOTE: Only one Bluetooth device can be active on the headset at a time. For example, if you are making a call with the
headset while streaming music from a second device, the music will be turned off until the call is over.
Making Calls with iPhone
Once the i60 is successfully paired with your iPhone, you can use the headset to make and receive calls.
When idle or on a call the Bluetooth LED will blink Blue
Receiving Calls
When the i60 Bluetooth is powered on and there is an incoming call you will hear a musical chime or your default phone
ring tone.
NOTE: Media Audio will be lowered automatically during the call.
Rewind
Press the Bluetooth Button three times and hold on the third press.
If you want to… Then...
If you want to… Then...
If you want to… Then...
Activate voice dialing.
Making calls
Receiving calls
Streaming music from iOS devices
Use iPhone keys to make a call.
Redial last number.
Turn off the microphone.
Adjust the volume. Press the Bluetooth Volume Up and Down buttons.
End a call. Press the Bluetooth button once or tap the tap sensor once.
Double-tap the tap sensor. (Red Oval)
Accept a call. Press the Bluetooth button once or tap the tap
sensor once. (Red Oval)
Press the Bluetooth Button once.
End a call. Press the Bluetooth button once or tap the tap sensor once.
Reject a call. To send the call directly to your voicemail, press and hold
the Bluetooth button for three seconds until you hear a beep.
You can also do nothing, which will send the call to voicemail
after the programmed number of rings.
Press the Mic Mute button. Press again to turn the
microphone back on.
Dial the number as normal.
Double-click Bluetooth button.
Play/Pause.
Press the Bluetooth Button twice and hold on the second press.Fast forward.
Press the Bluetooth Button twice. Skip to the next track.
Press the Bluetooth Button three times.
Skip back one track
(or to beginning of current song).
Rewind
Press the Bluetooth Button three times and hold on the third press.
If you want to… Then...
If you want to… Then...
If you want to… Then...
Activate voice dialing.
Making calls
Receiving calls
Streaming music from iOS devices
Use iPhone keys to make a call.
Redial last number.
Turn off the microphone.
Adjust the volume. Press the Bluetooth Volume Up and Down buttons.
End a call. Press the Bluetooth button once or tap the tap sensor once.
Double-tap the tap sensor. (Red Oval)
Accept a call. Press the Bluetooth button once or tap the tap
sensor once. (Red Oval)
Press the Bluetooth Button once.
End a call. Press the Bluetooth button once or tap the tap sensor once.
Reject a call. To send the call directly to your voicemail, press and hold
the Bluetooth button for three seconds until you hear a beep.
You can also do nothing, which will send the call to voicemail
after the programmed number of rings.
Press the Mic Mute button. Press again to turn the
microphone back on.
Dial the number as normal.
Double-click Bluetooth button.
Play/Pause.
Press the Bluetooth Button twice and hold on the second press.Fast forward.
Press the Bluetooth Button twice. Skip to the next track.
Press the Bluetooth Button three times.
Skip back one track
(or to beginning of current song).