Owner's Manual

PAIRING INSTRUCTIONS
Pairing the Headset to the Transmitter
In order to play audio, the PX4 headset must be "paired" (linked) to its transmitter. The headset and
transmitter are paired out of the box. The instructions below are only necessary if pairing appears
to have been lost.
Step 1: Headset should be powered OFF. (Hold Power button for 3 seconds.)
Step 2: Press and hold the Pair button on the transmitter for 5 seconds until the transmitter’s
Power/Link LED flashes rapidly. Release.
Step 3: Press and hold the headset’s Power button for 6 seconds until you hear the second
double-beep, then release. The headset LED will flash rapidly (twice per second).
Note: You will hear a double-beep (headset on), followed by an ascending chime (Bluetooth on),
then the second double-beep (pairing headset).
Step 4: Within 30 seconds, the transmitter Power/Link LED will remain on solid, and the headset
Power LED will blink steadily once per second, indicating that pairing was successful.
Power Button /
Headset LED
Left Earcup
Pair Button
Power/Link LED