For PS4™ | PS3™ | Mobile Gaming 7.
7.1 SURROUND SOUND GAMING HEADSET Congratulations on your purchase of the Ear Force® Stealth 500P headset from Turtle Beach. Designed for PS3™, PS4™ and PS Vita™ gaming, the STEALTH 500P also supports music, movies, and chat. Turtle Beach brings over 35 years of expertise to transforming your listening experience.
In the Box For our Knowledgebase and Technical Support please visit turtlebeach.
Table of Contents About the STEALTH 500P P5 Overview P6 Parts and Controls P7 Headset Charging P8 PS4™ Setup P9 PS3™ Setup P12 Mobile Setup P15 Pairing the Headset and Transmitter P16 Adjusting sound (PS3/PS4) P17 Specifications P18 Troubleshooting tips P19 Important safety information P21
About the STEALTH 500P The STEALTH 500P is an advanced gaming headset optimized for PS3 ™ and PS4™ consoles. It also unlocks the audio potential of music, movies and more. To get the most from your STEALTH 500P, please take a few moments to review this introduction. Overview The Ear Force® Stealth 500P is armed with completely wireless DTS Headphone:X 7.1 Channel Surround Sound and massive 50mm speakers for PS4 or PS3.
Overview Comfortable & Quiet Breathable, around-the-ear mesh cushions for hours of comfort and noise isolation. Stop Shouting! Mic Monitoring lets you hear your own voice in the headset to avoid shouting. Awesome Turtle Beach Audio Four EQ Presets and large 50 mm speakers combine to deliver butt-kicking audio. Rechargeable Battery Ditch the batteries with a built-in rechargeable battery that delivers up to 15 hours of wireless gaming.
Parts and Controls Headset Controls: Right Earcup Power Button Hold (1s) = Power On / Power Off Power LED (Battery Status) Red = Charging Blue = Charged / In Use Game Volume Control (Pairing Status) Single Blink = Transmitter Connected Double Blink = Transmitter not Connected Preset Button* *Press = Cycle EQ Audio Presets *Press and Hold = Cycle DTS Headphone: X Surround Modes Chat Volume Control USB Charging Port Mobile Connection Mic Mute Button Press = Mic On/Off Transmitter Digital Optical Input
Headset Charging Even though the STEALTH 500P supports wired connection to mobile devices, it uses an internal amplifier and so requires power from its rechargeable battery. NOTE: Make sure to charge your Headset regularly. NOTE: Always charge your Headset before storing it for more than three months. Never store the headset in temperatures above 113°F/45°. A E 1. Connect the USB plug of the USB Charging Cable to a USB port. 2.
PS4™ Setup The Ear Force STEALTH 500P headset is designed for use with PS4™ consoles. A D DIGITAL OUT (OPTICAL) B F 1. Plug the Removable Mic Boom into the jack on the left earcup of the Headset. 2. Connect the square optical plug of the Digital Optical Cable to the Digital Out (Optical) port of the PS4™ console. 3. Insert the small plug of the Digital Optical Cable into the Digital Optical Input on the side of the Wireless Transmitter. 4.
PS4™ Setup Primary Output Port Select the input format supported by the device (TV, AV amplifier or receiver) that is connected using the DIGITAL OUT (OPTICAL) port. Note that if the device does not support the selected format, the speakers might be damaged. Dolby Digital 5.1ch DTS 5.1ch AAC Linear PCM 44.1kHz Linear PCM 48.kHz OK x Enter Back 1. Go to Settings » Sound and Screen » Audio Output Settings » Primary Output Port » Digital Out” (OPTICAL). 2. Select Only Dolby Digital 5.1ch.
PS4™ Setup Audio Devices Input Device USB Headset(Turtle Beach Stealth 500P Chat) Output Device USB Headset(Turtle Beach Stealth 500P Chat) Adjust Microphone Level Volume Control (Headphones) Output to Headphones x Enter Chat Audio User 1 Back 5. Go to Settings >> Devices >> Audio Devices 6. Select USB Headset(Turtle Beach Stealth 500P Chat) for Input & Output Device 7. Set Output to Headphones to Chat Audio 8.
PS3™ Setup A D F B DIGITAL OUT (OPTICAL) 1. Plug the Removable Mic Boom into the jack on the left earcup of the Headset. 2. Connect the square optical connector of the Digital Optical Cable to the Digital Out (Optical) port of the PS3™ console. 3. Insert the small plug of the Digital Optical Cable into the Digital Optical Input on the side of the Wireless Transmitter. 4. Insert the Wireless Transmitter into a USB port on the PS3 console.
PS3™ Setup 1. Go to Settings » Accessory Settings » Audio Device Settings Audio Device Settings 2. Set the Input Device and Output Device fields to Turtle Beach Stealth 500P. Microphone Level 3 Input Device TURTLE BEACH Stealth 500P Output Device TURTLE BEACH Stealth 500P OK X Enter Back 3. Go to Settings » Sound Settings » Audio Output Settings » Optical Digital Audio Output Settings Select the connector on the TV or AV amplifier (receiver). Turn on the power of the connected device.
PS3™ Setup 4. Check ONLY Dolby Digital 5.1 Ch. Audio Output Settings Select an output format supported by the TV or AV amplifier (receiver) in use. The system will automatically adjust the output to match the selected format. Dolby Digital 5.1 Ch. DTS 5.1 Ch. AAC Linear PCM 2CH. 44.1 kHz Linear PCM 2 Ch. 88.2 kHz Linear PCM 2 Ch. 176.4 kHz Linear PCM 2 Ch. 48 kHz Cancel X Enter 0 12/14 12:15 PM 5. Go to Settings » Sound Settings » Audio Multi-Output 6. Set to On.
Mobile Setup A D C 1. Insert one end of the Mobile Cable into the Mobile Connection on the right earcup of the Headset. 2. Insert the other end into the headset jack of your mobile phone, mobile game console, tablet or computer. NOTE: The Volume controls on the headset do not affect your Mobile Audio. Make sure to control the audio level from your Mobile device. Mobile audio is not processed in DTS Headphone: X Surround Sound.
Pairing the Headset and Transmitter NOTE: Your STEALTH 500P Headset ships from the factory already paired for communication with your Wireless Transmitter. In normal operation, it should not be necessary for you to pair the two again. You should only need to perform pairing yourself in the event that wireless communication fails. First check that the headset is powered on and is within range.
Adjusting sound (PS3/PS4) NOTE: The following control functions are inactive when the Headset is connected to the Mobile Cable with In-Line Microphone. If you want to… Then... Adjust game/media volume. Use the Game Volume Control on the Headset. Adjust chat volume. Use the Chat Volume Control on the Headset. Turn the microphone on or off. Press the Mic Button on the Headset. You can optimize the sound for your specific game or entertainment content.
Specifications Headset · · · · · Speakers 50mm with Neodymium Magnets Frequency Response 20Hz - 20kHz Earpad Material Perforated Leather (Black) with Foam Cushion Earcup Design Over-Ear (Closed) Microphone Design Removable Omni-Directional Microphone · · · · · · Game Input Digital Optical (Mini-Toslink) Chat/Mic Input/Output USB Surround Sound Processing DTS Headphone:X 7.
Troubleshooting Tips No Sound Possible cause Solution Power is off Confirm that the Headset is on. The Charge/Pairing Status LED should be illuminated blue. NOTE: The Headset must be powered on for use, even when you’re connected via the Mobile Cable. Dead/low battery Confirm that the Headset battery is charged. Loose connection In game console use, confirm that Wireless Transmitter is properly seated in the USB port and that the Digital Optical Cable is firmly connected at both ends.
Troubleshooting Tips Voice Chat Drops Most in-game voice chat drops are caused by network congestion or “lag.” They usually subside after a few moments so please be patient. In extreme cases, you may need to leave the game and return to reset the chat function. If you use a wireless internet connection, low signal strength from your modem/router can make the voice chat malfunction. For best results, we recommend a wired connection from your modem/ router to your game console.
Important Safety Information To avoid potential damage to the device, always disconnect all cables before transporting it. WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods of time, so it is important to keep the volume at a safe level. Over time, your ears adapt to loud volume levels, so a level that may not cause initial discomfort can still damage your hearing.
Regulatory Compliance Statements for the EAR FORCE Stealth 500P RX & TX Model Federal Communications Commission (FCC) Compliance Notices This section includes the following FCC statements for the EAR FORCE Stealth 500P RX & TX Models: · FCC ID: XGB-TB3270(Headset) · FCC ID: XGB-TB3271(Transmitter) · Class B Interference Statement · RF Radiation Exposure & Hazard Warning · Non-Modification Statement · Deployment Statement Class B Interference Statement This equipment has been tested and found to comply with
Declaration of Conformity Heading Marking by this symbol: indicates compliance with the Essential Requirements of the R&TTE Directive of the European Union (1999/5/EC). This equipment meets the following conformance standards: Safety: EN 60950-1: 2006 + A11: 2009 + A1: 2010 + A12: 2011 (T-Mark License). IEC 60950-1: 2005 (2nd Edition) + Am 1: 2009 (CB Scheme Report/Certificate), EN 50332-1: 2000, EN50332-2: 2003 EMC: EN 55022: 2010, EN 301 489-1 v1.9.2 (2011-09), EN 301 489-17 v2.2.
LIMITED ONE YEAR WARRANTY FOR TURTLE BEACH PRODUCTS: Voyetra Turtle Beach, Inc. (“VTB”) warrants to the original end-user purchaser (“Purchaser”) that the retail Turtle Beach hardware product herein (“Product”) will be free of defects in materials and workmanship for a period of one year from the date of purchase by the Purchaser (“Warranty Period”). Any Extended Warranty or Service Plans purchased through a Retail store are not honored by VTB.
EXCLUSIONS FROM LIMITED WARRANTY: This Limited Warranty shall not apply and VTB has no liability under this Limited Warranty if the Turtle Beach Product: - is used for commercial purposes such as “LAN, Call Centers” (including rental or lease); - is modified or tampered with; - is damaged by Acts of God, power surge, misuse, abuse, negligence, accident, wear and tear, mishandling, misapplication, or other causes unrelated to defective materials or workmanship; - serial number is defaced, altered or remov
For PS4™ | PS3™ | Mobile Gaming Watch Turtle Beach product training videos at: youtube.com/TurtleBeachVideos Product support and warranty information: TurtleBeach.com/support © 2014 Voyetra Turtle Beach, Inc. Turtle Beach, the Palm Tree Logo, Voyetra, Ear Force, and Audio Advantage are trademarks of Voyetra Turtle Beach, Inc. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited.
