User guide

5
PS3 Audio Setup
Analog
Step 1
After powering on the PS3, go to “Settings” > “Sound Settings” >
“Audio Output Settings”.
Step 2
Select ” Audio Input Connector / SCART / AV Multi” to send the audio
output to the PLa.
Step 3
Press “X” to save this setting.
HDMI or Digital (optical)
Step 1
After powering on the PS3, go to “Settings” > “Sound Settings” >
“Audio Multi-Output”. This will allow you to use the standard PS3 AV
cable simultaneously with an HDMI or digital (optical) audio output.
Audio Output Settings
Select the connector on the TV or AV amplifier (receiver).
Turn on the power of the connected device.
Cancel
Audio Output Settings
12/14 12:15 PM
0
On
Sets to output audio through multiple connectors
simultaneously. Audio output to connectors that are
not selected in [Audio Output Settings] is downscaled
to 2 Ch.