SDS

- 2 -
4. FIRST AID MEASURES
EYE: Flush with water for 15 minutes. Get medical attention if effects persist.
SKIN: Remove contaminated clothing. Wash effected areas thoroughly with soap and water.
Launder clothing before re-use.
INHALATION: Remove to fresh air. Use artificial respiration and oxygen if needed.
INGESTION: Rinse mouth. Do not induce vomiting. Get prompt medical attention. Aspiration
into lungs can cause chemical pneumonitis which may be fatal.
5. FIRE FIGHTING MEASURES
FLASH POINT: (Seta Cl. Cup): >200
o
F (>93
o
C) Explosive Limits: Lower: n/av Upper: n/av
EXTINGUISHING MEDIA: Water Spray, Alcohol Foam, Carbon Dioxide, Dry Chemical
SPECIAL FIRE FIGHTING PROCEDURES: Avoid flow of material to sewers. See Sec. 8 for personal
protection.
6. ACCIDENTIAL RELEASE MEASURES
SPILL OR LEAK PROCEDURES: Remove all ignition sources. Provide good ventilation. Take up
spills and put into closed containers. Avoid flow to sewers. Floors may be slippery. See Section 8 for
other protective measures.
7. HANDLING AND STORAGE
STORAGE TEMPERATURE (MIN./MAX.): 32 º F (0 º C)/ 120º F (49 C)
SHELF LIFE: 7 years minimum when the original container is kept tightly closed and properly stored.
SPECIAL SENSITIVITY: None.
HANDLING AND STORAGE PRECAUTIONS: Store in cool and ventilated places, but avoid freezing.
Keep containers closed.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
EYE PROTECTION REQUIREMENTS: Wear goggles. Have convenient eye wash stations.
SKIN PROTECTION REQUIREMENTS: Wear solvent resistant gloves and other clothing as
needed to prevent exposure.
RESPIRATOR/VENTILATION PROTECTION REQUIREMENTS: Provide sufficient ventilation
to avoid exposure levels above the established TLV.
INGESTION PROTECTION REQUIREMENTS: Avoid swallowing or sucking into lungs.
EXPOSURE LIMITS: Not established for product as whole.
PDF created with pdfFactory trial version www.pdffactory.com