Operation Manual

CARE AND CLEANING

Protect your Element II from shock, excessive temperatures,

chemical attack, and tampering. Protect the lens against

scratches with a transparent Instrument Lens Protector. Small

scratches will naturally disappear underwater.

• Soak and rinse the Element II in fresh water at the end of

each day of diving, and check to ensure that the areas

around the low pressure (depth) sensor (Fig. 100a) and

button are free of debris or obstructions.

• To dissolve salt crystals, use lukewarm water or a 50%

white vinegar/50% fresh water bath. After removal from

the bath, place the unit under gently running water and

towel dry before storing.

• Transport your unit cool, dry, and protected.

INSPECTIONS AND SERVICE

Your Element II should be inspected annually by an Authorized

TUSA Dealer who will perform a factory prescribed function

check and inspection for damage or wear. To keep the

product's warranty in effect, this inspection must be completed

one year after purchase (+/- 30 days). TUSA recommends that

you continue to have this inspection performed every year to

ensure it is working properly.

To Obtain Service

Take your Element II to an Authorized TUSA Dealer.

Fig. 100 - BACK OF CASE