Operation Manual

105
WARNING: If there are any portions of the
display missing or appearing dim, or if a Low
Battery condition is indicated, return the Element
II to an Authorized TUSA Dealer for a complete
evaluation before attempting to use it.
RETURNING THE MODULE TO BOOT
• If the Boot was fitted with a Spacer and it was previously
removed, replace the Spacer into the Boot.
• Orient the Module over the opening in the Boot, and dip
the bottom edge into it while pressing the top edge with the
palm of your hand. Stop pressing when the bottom edge of
the Module has just entered the Boot.
• Correct the alignment of the Module as needed so that it is
straight.
• Press the Module completely into place with your thumbs,
watching the alignment, until it snaps into place.