Operation Manual

PC INTERFACE

Interface with a PC (for data Upload and Download) is accom-

plished by connecting the Element II to a PC USB Port using the

USB Interface Cable avaiable as an optional accessory.

The PC Interface program, together with a USB Driver, is

downloadable from tusa.com. The Help portion serves as the

user manual and can be printed for personal use. The Settings

Upload portion is used to check the Element II's existing Settings

and for entering Time, Alarm, and other settings into the Element

II. The Download portion is used to retrieve Data that was

sampled during dives and stored in the Element II's memory.

The Element II checks for an External Access request once every

second while in Surface Mode. Checks are not made if the unit

is wet. For a connection to be made, the Interface Cable is

clipped onto the Element II's Data Port and plugged into a PC

USB Port. To establish the connection, the PC program must be

running.

When the connection is made, a PC screen appears on the

Element II displaying the graphic PC and a countdown for 2

minutes or until completion of the interface operation. Then

operation reverts to the Surface Main screen.

Fig. 5 - PC

(during upload/download)