Operation Manual

Set Audible Alarm, information includes (Fig. 19):

> Graphic AUD

> Set Point graphic ON (or OFF), flashing.

• Pressing and releasing the S button momentarily (< 2 sec)

will toggle between ON and OFF.

• Pressing and releasing the A button momentarily (< 2 sec)

will save the setting and access Set Depth Alarm.

• Depressing the A and S buttons simultaneously for 2

seconds will save the setting and revert to the Set A screen.

• Depressing the M button for 2 seconds, or if no button is

pressed for a period of 2 minutes, operation will revert to

the NORM (or GAUG) Surface Main screen.

Set Depth Alarm, information includes (Fig. 20):

> Graphic DEP

> Set Point value, flashing, with MAX and FT (or M) icons.

• Depressing the S button will scroll upward through the Set

Points from 30 to 330 FT (10 to 100 M) in 10 FT (1 M)

increments at a rate of 8 per second until it is released.

• Pressing and releasing the S button momentarily and

repeatedly (< 2 sec each time) will step upward through the

Set Points one at a time.

• Pressing and releasing the A button momentarily (< 2 sec)

will save the setting and access Set EDT Alarm.

Fig. 19 - SET AUDIBLE AL

Fig. 20 - SET DEPTH AL