Operation Manual

> The display will revert to the Main after 5 seconds or if the A button is pressed/

released.

• Depress the S button for 2 seconds to activate the Backlight.

FREE MODE COUNTDOWN TIMER (CDT)

After accessing the Free CDT Status screen from the Free Surface Main screen, the CDT

can be started, stopped, and set.

Displayed are the graphics CDT and ON if running with Countdown Time (hr:min) remain-

ing, or OFF flashing and the previously Countdown Time set, or OFF (solid) and 0:00 if no

time was previously set (Fig. 84).

• Pressing and releasing the S button momentarily (< 2 sec)

will toggle between ON and OFF. A toggle to ON will

Start the CDT if a Time has been set.

• Depressing the A and S buttons simultaneously for 2

seconds will access Set Free CDT.

• Pressing and releasing the S button momentarily (< 2 sec)

will revert to the Free Surface Main screen.

• If the M button is pressed for 2 seconds or if no button is

pressed during a period of 2 minutes, operation will revert

to the Free Surface Main screen.

• Depressing the S button for 2 seconds will activate the

Backlight.

Fig. 84 - CDT STATUS

(Off, not set)