Operation Manual

NOTE: The FREE EDT Alarm can only be Set

(turned OFF or ON) while on the Surface and

can not be changed during a Dive.

Set Free EDT Alarm, information includes (Fig. 89) -

> Graphics EDT, 30 with clock icon, and SEC

> Set Point OFF (or ON) flashing.

• Pressing and releasing the S button momentarily (< 2 sec)

will toggle the Set Point between OFF and ON.

• Pressing the A button momentarily (< 2 sec) will accept the

setting and access Set Free Depth Alarm 1.

• Depressing the M button for 2 seconds, or if no button is

pressed during a period of 2 minutes, operation will revert

to the Free Surface Main screen.

FREE DIVE DEPTH ALARMS (DA)

Free Dive mode features 3 Depth Alarms (DAs) that can be Set

at progressively deeper Depths and turned OFF/ON.

> If Alarm 1 is set OFF, then Alarms 2 and 3 will be disabled.

> If Alarm 2 is set OFF, Alarm 3 will be disabled.

When each alarm Depth set is reached during a dive, 3 short

beeps will sound 3 times and the graphic DA1 (DA2, DA3) and

Depth digits will flash (Fig. 90).

Fig. 89 - SET EDT ALARM

Fig. 90 - FREE DA ALARM

(DA 2, 3 similar)