Operation Manual

26
Figure 7: Date/Time Set Mode.
 If the hour displayed is correct—or you have changed it to the
correct hour and wish to proceed further—simply press the A
button. The minutes display will now blink. You can either
change this using the B button, or continue on to the seconds
display.
By repeating this process, you will eventually cycle through
all the date/time parameters shown, in the order shown in
Figure 7. This is:
1. Hours
2. Minutes
3. Seconds
4. Year
5. Month
6. Day
After you have cycled through to the Day setting, pressing
button A one additional time will return the computer to
Surface Mode. Note that there is no Mode Indicator for
Date/Time Set Mode.