Installation Instructions
Table Of Contents
- 页 1
- 书签BE8233B8 For Models : 673-6304, 673-6305
- 书签17EE81F5 Needed
- 书签C4B96818 Adjustable Wrench Groove Joint Plier
- 书签C8C610B5 Teflon Tape
- 书签6CDE4FA7 673-6306, 673-6307 673-6308
- 书签AB41DA55 Abbeville
- 书签51A57944 Exposed Single Handle Shower Faucet System
- 书签45A33EFC connections with Teflon tape. Always wrap in a clockwise direction.
- 书签BDEA393F TUSCANY
- 页 2
- 书签FBE68E70 1
- 书签29C5B6FE 28
- 书签03BE2C16 29
- 书签C630C8CE 30
- 书签CD2DFF1F 31
- 书签17893768 32
- 书签2AA53B5D 33
- 书签18EEEF3B 34
- 书签EEC36C4A 35
- 书签24B317AB 36
- 书签FE1C4DBD 37
- 书签666CE074 38
- 书签B02F0523 39
- 书签949013F2 40
- 书签4F2587BD 41
- 书签DD7D2A4E 42
- 书签68387422 43
- 书签BB3A635E 44
- 书签113B19D1 45
- 书签F19AD1D2 46
- 书签DEBEFEF8 47
- 书签6F0811E7 48
- 书签1C2864FD 49
- 书签65F7EE5D 53
- 书签15267ED1 54
- 书签1C0D7B42 55
- 书签A234539C 56
- 书签B73E1229 57
- 书签98C2F2BD 58
- 书签70D45DA5 59
- 书签43ABBE44 50
- 书签5D56BB06 51
- 书签839C4FF6 52
- 书签3E6B8AF3 27
- 书签491EEEFA 26
- 书签9088164C 25
- 书签82A836DB 24
- 书签C820F023 23
- 书签0D19553C 22
- 书签7DF97020 21
- 书签F5A89302 20
- 书签9F6D6A3F 19
- 书签7F92B885 18
- 书签2475B57D 17
- 书签38705E2A 16
- 书签67F7A056 15
- 书签2EC9083F 14
- 书签61B75112 13
- 书签8C55A505 12
- 书签85682A99 11
- 书签C2B62C45 10
- 书签26909B0B 9
- 书签3AB481CF 8
- 书签BCF2A4C6 7
- 书签57929DE8 6
- 书签DAF4DDC8 5
- 书签A167737B 4
- 书签B5354F8E 3
- 书签5FBA1786 2
- 书签86F330FB 1
- 书签C7FC69A8 Connector
- 书签53B2B1E0 Valve
- 书签C4225822 Shower Supply Tube
- 书签6D041676 Sleeve
- 书签540EB739 O-ring
- 书签AE3F4D01 Adjustable Tube
- 书签8CB67252 Rubber Stopper
- 书签F2E33D3A Washer
- 书签5EB4758A O-ring
- 书签FC4F1E3B Connector
- 书签2E586633 Shower Head
- 书签E443C3ED Shower Head Connector
- 书签E40BB1CD O-ring
- 书签B2DBB570 Shower Arm
- 书签C7BBDD97 Set Screw Button
- 书签3E8A629D Set Screw
- 书签73C07418 Set Screws
- 书签9E0B9E70 Wall Base
- 书签61B91CD2 Washer
- 书签A35CADB0 Tapping Screws
- 书签9A28A52E Extension Tubes
- 书签48F12456 Shower Arm Mount
- 书签1BBFF89C Wall Anchors
- 书签C4D1F87A Shower Hose
- 书签91029922 Shower Holder
- 书签2FAB5C45 O-ring
- 书签5964C3A3 Spring
- 书签2CCAC3CD Set Screws
- 书签4ACE4136 Diverter Core
- 书签D9C45B18 Washer
- 书签7970958B O-ring
- 书签E35DB35A Seal Joint
- 书签B13F3F9C Diverter
- 书签64E2544F O-ring
- 书签108829B9 O-ring
- 书签08874A13 Connector
- 书签C472FDDC Handheld Showerhead
- 书签DB47C23C Allen Wrench
- 书签66BCE512 Tapping Screws
- 书签49A61916 Shower Holder Mount
- 书签5A2F244C Wall Base
- 书签39D712E9 Inlet screw
- 书签FAD1FC93 Nut
- 书签EA9229E0 Cartridge
- 书签DE82DD1B Trim Cap
- 书签0DE2C59E Handle
- 书签3864F7E1 Set Screw
- 书签EC652CCC Lock Nut
- 书签91F6C3EE Washer
- 书签454C9E8C Handle Button
- 书签8A474896 Offset Water Supply Nipple
- 书签40C6C307 Valve Body
- 书签B1558606 O-ring
- 书签08298F04 O-ring
- 书签CC7D7992 No.
- 书签46F72DF3 Part Name
- 书签95A370AF 2
- 书签3082FDD1 3
- 书签D39EBADE 4
- 书签3CC651CB 5
- 书签690C6C7A 6
- 书签D1A349FE 7
- 书签80D90272 8
- 书签C74126EE 9
- 书签5CA8A5FC 10
- 书签25797AA0 11
- 书签CC1B5EBE 12
- 书签8E1CB48B 13
- 书签21F20BC0 8
- 书签35958365 9
- 书签2496DCDD 10
- 书签CB72570D 11
- 书签9098A6B3 12
- 书签E0B2C602 13
- 书签B0FB9C8E 14
- 书签2FD09332 15
- 书签3F901FE9 16
- 书签252EAC82 17
- 书签83524F21 18
- 书签5F84F712 19
- 书签27F29786 20
- 书签2061C502 21
- 书签8269E97D 22
- 书签C25C105D 23
- 书签7455BB0F 24
- 书签D99DD444 25
- 书签4CD80C8C 26
- 书签BC6BADB3 27
- 书签E964D663 28
- 书签F4B2F665 29
- 书签FCC289AB 30
- 书签5B6F2AD1 31
- 书签AADFBF9B 32
- 书签C6A2A987 33
- 书签81E4CCEB 34
- 书签9B5596DF 35
- 书签A3E19B45 36
- 书签EB46DC5C 37
- 书签45EEB7B3 38
- 书签3B1444A7 39
- 书签FFD5A67B 40
- 书签34F0F1BB 41
- 书签E0CF39F2 42
- 书签6FE442E8 43
- 书签E0780109 44
- 书签62B9DB91 45
- 书签31070B37 46
- 书签A2D6C067 47
- 书签B1212612 48
- 书签3CFE2BEB 49
- 书签566FBD6B 50
- 书签1057DC20 43
- 书签D4F051E3 42
- 书签CDFD7ADB 51
- 书签07BC2E32 52
- 书签B6B93C6E 53
- 书签DEF741A0 54
- 书签008B163F Diverter Wheel
- 书签DA9C2AA4 O-ring
- 书签00C56567 55
- 书签7F609E2A 56
- 书签260DCFB5 57
- 书签C3CF90DB Wall Anchors
- 书签6CDEDB0B Washer
- 书签2EA17CD8 Washer
- 书签BCA2F360 58
- 书签52DA1A48 58
- 书签8F06B2BB 59
- 页 3
- 书签65895C53 1. Shut off the water supplies before installation. Note the minimum/maximum installation dimensions between the offset water supply nipple \(#13\), shower arm mount \(#49\) and floor to determine placement. Cover the tub drain before installation to keep parts from accidentally falling down the drain.
- 书签241F65E7 5-15/16''
- 书签8ADC5E18 49
- 书签15B916E0 Floor
- 书签57935EB3 Min43-7/16'' Max55-1/8''
- 书签E6F735FF Min35-7/16'' Max39-3/8''
- 书签E585ABC7 5-15/16''
- 书签D47F7906 2. Use the shower arm mount \(#49\) to mark the tapping screw holes. Drill 5/16" holes in the wall where marked. Push the wall anchors \(#50\) into the wall using a hammer to gently tap them into place. Line up the shower arm mount \(#49\) with the wall anchors \(#50\) and secure with the tapping screws \(#47\). To mount the shower holder mount \(#56\) repeat the step using the shower holder mount \(#56\) to mark the tapping screw holes.
- 书签143D1353 50
- 书签FBF24B63 49
- 书签8462A63B 47
- 书签36F170A5 5/16''
- 书签9F63DC66 1-9/16''\(Depth\)
- 书签36819A63 3. Apply Teflon tape to the threads of the offset water supply nipple \(#13\). Screw the offset water supply nipple \(#13\) to the embedded outlet pipe.
- 书签6F8F24C5 13
- 书签D3E0F7BB 13
- 书签69CA78AA Step 1-3
- 书签814C9982 13
- 书签D0A0FDE0 13
- 书签21C02993 Min79-7/8'' Max94-1/2''
- 书签BE35E989 Min35-7/16'' Max39-3/8''
- 页 4
- 书签74FC2AEB Installation Instructions
- 书签2D39AF8B 4. Slide the shower arm \(#41\) onto the adjustable tube \(#32\). Secure the pieces with the set screws \(#43\) using the provided Allen wrench \(#54\). Insert the set screw button \(#42\). Be careful not to damage the connection at the top of the adjustable tube \(32\).
- 书签2F3DA7E6 5. Slide the shower supply tube \(#29\) onto the valve body \(#7\). Secure the pieces with the set screws \(#24\) using the Allen wrench \(#54\). Be careful not to damage the connector \(#15\).
- 书签EE088262 42
- 书签48DFCB04 43
- 书签3F420A0E 41
- 书签4AFBFFF3 42
- 书签1AFA57A8 43
- 书签278119E8 32
- 书签F6F2CAA6 29
- 书签7C5032E0 54
- 书签28BDB95C 29
- 书签B83E3E18 7
- 书签F15C7F40 24
- 书签24D1FF03 54
- 书签2676A882 15
- 书签443B9E2B Step 4-5
- 页 5
- 书签7FD2258E Installation Instructions
- 书签F5461AE7 Step 6-7
- 书签0762D0AE 6. Screw a wall base \(#12\) onto each offset water supply nipple \(#13\). Turn the wall base \(#12\) clockwise until flat against the wall and in the desired position. Align the offset water supply nipples \(#13\) as needed. Slide the wall base \(#45\) onto the shower arm mount \(#49\).
- 书签AF811338 7. Verify the washer \(#11\) is in place in each offset water supply nipple \(#13\). Connect the valve body \(#7\) to the offset water supply nipples \(#13\) and use a wrench to tighten the nuts \(#9\). Slide the shower arm \(#41\) onto the shower arm mount \(#49\). Add or remove extension tubes \(#48\) as needed. Tighten the set screws \(#44\) using the Allen wrench \(#54\) provided.
- 书签82FAC201 13
- 书签08D8DB70 12
- 书签91621DA4 11
- 书签DCF86FE6 41
- 书签9C7BF0AC 45
- 书签6D875162 49
- 书签72291FCC 44
- 书签0607DEB0 54
- 书签7410120F 13
- 书签933586C7 11
- 书签EE638B47 12
- 书签7233FA66 7
- 书签EF96459C 9
- 书签C29AEB9E 48
- 页 6
- 书签E4F13EDD Installation Instructions
- 书签6F1BF3FB Step 8-10
- 书签F11FB6F0 8. Slide the shower holder \(#52\) onto the shower holder mount \(#56\). Verify the washer \(#58\) is in place inside the shower hose \(#51\) and attach to the valve body \(#7\). Do not install the handheld showerhead \(#53\).
- 书签ED23E3D2 9. Open the hot and cold water shut offs. Check for leaks. If there is a leak at the offset water supply nipple \(#13\) turn off the water shut offs and turn the nut \(#9\) 1/4 turn using a wrench. Recheck for leaks.
- 书签20564439 10. Turn on the handle \(#3\). Run the hot and cold water for one minute. This will help clear any and debris that may have come loose during installation and prevent the system from becoming clogged. Hold the shower hose \(#51\) in the tub to keep water from spraying out of the tub, pull the diverter wheel \(#17\) and turn approximately a 1/4 turn until the diverter wheel \(#17\) locks in the extended position. Run the water an additional 30 seconds. Turn off the water.
- 书签DE1C6209 7
- 书签109F9550 52
- 书签D8B47D93 55
- 书签B013242C 56
- 书签4008E56C 57
- 书签C46ECF60 1/4''
- 书签01E019F2 1-1/8'' \(Depth\)
- 书签1C6D6E45 58
- 书签7F8465DA 51
- 书签2E4DED35 27
- 书签925C9D59 3
- 书签BD86A932 17
- 页 7
- 书签277E008B Step 11
- 书签05BA82DC 11. Verify the washer \(#58\) is in place in the shower hose \(#51\). Screw on the handheld showerhead \(#53\) and place into the shower holder \(#52\). Verify the washer \(#59\) is in place in the shower head \(#37\) and screw onto the shower arm \(#41\).
- 书签80087A6B Installation Instructions
- 书签005F5F66 41
- 书签8C536A7A 59
- 书签6F764CC0 37
- 书签A732BAF1 53
- 书签BF5B0100 58
- 书签B16BCDDE 51
- 书签D7BD8E56 52
- 页 8
- 书签FBA285DD Troubleshooting
- 书签7087BBDB Revised on 05/19/2020
- 书签32687801 Turn off the water supplies. Turn on the handle \(#3\) to release the pressure, then close the handle \(#3\). Remove the handle button \(#1\), set screw \(#2\), handle \(#3\), and trim cap \(#4\). If the lock nut \(#5\) is loose, tighten it. If the lock nut \(#5\) is tight, remove the lock nut \(#5\) and cartridge \(#6\). Verify the O-ring is clean and in proper alignment on the cartridge \(#6\). If the O-ring is dirty rinse it in warm water and reinstall onto the cartridge \(#6\). Reinstall the cartridge \(#6\), lock nut \(#5\), trim cap \(#4\), handle\(#3\), set screw \(#2\), and handle button \(#1\). Turn the water supplies on.
- 书签93EB99D6 The lock nut \(#5\) has come loose or the O-ring on the cartridge \(#6\) is dirty or misaligned.
- 书签896C3592 The rubber valve seat at the base of the pressure balance cartridge \(#6\) is dirty or broken.
- 书签5FA1E47B Turn off the water supplies. Turn on the handle \(#3\) to release the pressure, then close the handle \(#3\). Remove the handle button \(#1\), set screw \(#2\), handle \(#3\), trim cap \(#4\), lock nut \(#5\), and cartridge \(#6\). If the cartridge \(#6\) is damaged replace it. If the cartridge is dirty, soak it in warm vinegar for 4 hours. Every 30 minutes while the cartridge \(#6\) is completely submerged turn the stem on and off 10 times. Reinstall the cartridge \(#6\), lock nut \(#5\), trim cap \(#4\), handle \(#3\), set screw \(#2\), and handle button \(#1\). Turn the water supplies on.
- 书签D9C41CFD Leaks underneath the handle \(#3\).
- 书签BDBC10D8 The water will not shut off completely.
- 书签01750776 The cartridge \(#6\) is dirty, damaged, or pressure locked.
- 书签947E664A Turn off the water supplies. Turn on the handle \(#3\) to release the pressure, then close the handle \(#3\). Remove the handle button \(#1\), set screw \(#2\), handle \(#3\), trim cap \(#4\), lock nut \(#5\), and the cartridge \(#6\). Inspect the cartridge for dirt and damage. Replace the cartridge \(#6\) if damaged. Shake the cartridge \(#6\) and verify the pressure balance spool \(located at the bottom of the cartridge \(#6\)\) is moving freely \(clicks when shaken\). If the spool is not moving, tap it on your hand until it begins to click. If the cartridge \(#6\) is dirty, soak it in warm white vinegar for 4 hours. Every 30 minutes, while the cartridge \(#6\) is submerged in the vinegar, rotate the stem on and off 10 times. Reinstall the cartridge \(#6\), lock nut \(#5\), trim cap \(#4\), and handle \(#3\),set screw \(#2\), and handle button \(#1\). Turn the water supplies on.
- 书签13B65E64 The water temperature cannot be adjusted or there is no hot or cold water.
- 书签0A8F52E4 The manufacturer warrants that the parts and assemblies of this product will be free from defects in material and workmanship under normal household use for as long as it is owned by the original consumer purchaser. This warranty covers the original purchaser with original receipt only and does not include business, commercial or industrial use of this product. This warranty shall not apply to goods which have been subject to accidents, negligence or improper installation. Our responsibility under this warranty is limited only to the replacement of parts and no other costs. Should a malfunction occur within the time covered by this warranty, replacement parts may be obtained from Customer Service Department 1-800-626-3525 or email warranty@cmiproduct.com. The manufacturer will, at its discretion, provide replacement parts for installation by consumer for any parts that prove defective under normal usage and care with new or equivalent parts.
