Warranty

Have a question? DON’T GO BACK TO THE STORE, WE CAN HELP,
just call 1-800-626-3525 ,8 a.m. to 5 p.m. EST Monday-Friday.
Have a question? DON’T GO BACK TO THE STORE, WE CAN HELP,
just call 1-800-626-3525 ,8 a.m. to 5 p.m. EST Monday-Friday.
Have a question? DON’T GO BACK TO THE STORE, WE CAN HELP,
just call 1-800-626-3525 ,8 a.m. to 5 p.m. EST Monday-Friday.
26
26
Rubber Washer
27
27
Plastic Cap
service tag with the model number and phone
number as this will be helpful if you need
assistance in the future.
Do not remove the customer
Please Note:
Install escutcheon (#6) and secure with screws (#4)
and o-ring (#5). Make sure valve is in off position.
Assemble the handle (#3) on the escutcheon (#6),
secure with the set screw (#2) and install the
handle button (#1).
on #1 or #2 or #3
A B C
Remove the handle (if already installed) and unscrew the trim cap
and locknut in order to have access to the temperature limiting
device (red cap).
By default, the temperature limiting device is set to the highest
temperature (A). In order to reduce the temperature, remove the
temperature limiting device and turn clockwise to the desired
position (B or C).
(Factory setting)
Lock nut (#11)
Rubber valve seat at the base of
pressure balance cartridge (#12)
is dirty or broken.
lock nut (#11)
on cartridge(#12).
Dirty cartridge (#12).
Remove handle and pressure balance
cartridge (#12) to check the rubber
valve seat. Clean or replace it.
Turn off water supply. Remove the
cartridge (#12), and clean with a
brush and vinegar water. Reinstall
cartridge (#12). Be sure the
pressure balance metal pistion is
moving freely (located at the
bottom of cartridge(#12).
cartridge (#12)
Lock Nut
care
Cartridge Cover