Tools For Models : 6736063 Adjustable Wrench (2) Teflon Tape 3 BADEN Groove Joint Slier emerita maser Single Handle Kitchen Faucet With Deck Mounted Side Spray Silicone Sealant Maintenance Your new faucet is designed for years of trouble-free performance. Keep If looking new by cleaning It periodically with a soft, damp cloth. Avoid abrasive cleaners, steel wool and harsh chemicals as these well dull the finish and cold your warranty.
Parts Diagram / List No.
Preparation/Assembly 1. Shut off water supplies before installation. Remove current faucet, clean and dry the sink surface the new faucet is installed on. 2. Apply Teflon tape onto threads of the water inlet ports of the faucet in a clockwise direction. Please Note: Do not remove the customer service tag with the model number and phone number as this will be helpful if you need assistance in the future. 3.
. Adjust the direction of faucet body. Tighten Installation Instructions rubber washer (#29) and metal washer lock nut (#31) until snug. Tighten mounting screws (#32) with screwdriver until snug. . Install the side spray base (#33) through the right side hole (See diagram). Tighten down the lock nut (#34) but do not over tighten. . Slide the side spray (#26) through the hole. } Attach the spray hose to the hose i quick connect assembly (#22) on the faucet.
Installation Instructions 8. Apply Teflon tape onto the threads of the faucet 10. 11. . After installing the faucet, remove the aerator water shut offs in a clockwise direction. Tighten Water Supply Hoses the water supply hoses onto the water supply shut offs. Please be sure to connect the cold water line, to the cold water shut off (Typically on the right) and the hot water supply line to the hot water shut off (Typically on the left).
Trouble-Shooting If you've followed the instructions carefully and your faucet still does not work properly, take these corrective steps. Problem Cause Action Leaks underneath handle, Lock nut (#11) has come loose, Tighten the lock nut (#11) Remove handle (#1) and porridge {#12) to check if ceramic disks damaged permanently or airy. Re-Install the cartridge (#12) or Water will not shut off completely.
