Ring Waterway Gasket Allen Wrench 33 34 Mounting Screws O-ring Brass End Cap
1. Shut off water supplies before installation. Remove current faucet, clean and dry the sink surface the new faucet will be installed on. 3. For Deck Plate Installation - Place silicone sealant beneath the gasket (#24) and install the faucet through the second hole from the left of the sink. See diagram for visual. 4. Adjust the direction of faucet body. Tighten rubber washer (#29), metal washer (#30) and lock nut (#31) until snug. Tighten mounting screws (#32) with screwdriver until snug.
Without Side Spray Installation-Remove the quick connect assembly (#22) and replace it with the brass cap (#34), tighten the end cap. With Side Spray Installation-Place silicone sealant on the side spray gasket and install through the right side hole (See diagram). Tighten down the plastic lock nut but do not over tighten. 7. Do not remove the reminder tag for the installation instruction of the quick connect assembly. 8.
9. 10. After installing the faucet, remove the aerator collar (#10), aerator core (#9) and aerator washer (#8). 12. washer (#8), aerator core (#9) and aerator collar (#10).
Lock nut (#11) has come loose.
