Technical Specifications

ManualsBrandsTuscany ManualsKitchenSharena One-Handle Pull-Down Stainless Kitchen Faucet

Tools

- Adjustable Wrenches

- Screwdriver

- Safety Glasses

- Silicone Sealant

- Pliers

- Supply Lines

Maintenance

Tuscany

faucets are crafted with skill and quality to last a

lifetime. By following the instructions in this booklet, you will

enjoy this quality item for years to come. To clean, wipe gently

with a soft damp cloth, then wipe dry. Tuscany

nishes are

very durable. However, to assure a long lasting luster, harsh

abrasives or polishes should be avoided.

Safety Tips

Turn off the water before loosening any connections or

disassembling the faucet. When working underneath a sink,

protect your eyes from any dust or dirt by wearing safety

glasses.

Important Points

Most problems can be xed by tightening a nut or connection,

or replacing a washer. Check supply line connections for any

leaks and tighten if necessary. Don’t overtighten any supply

line connections.

For Models:

673-6075, 673-6076

Sharena

Pull-Down Kitchen

Faucet

Summary of content (7 pages)

PAGE 1
Tools - Adjustable Wrenches - Screwdriver - Safety Glasses - Silicone Sealant - Pliers - Supply Lines For Models: 673-6075, 673-6076 Sharena Pull-Down Kitchen Faucet Maintenance Tuscany® faucets are crafted with skill and quality to last a lifetime. By following the instructions in this booklet, you will enjoy this quality item for years to come. To clean, wipe gently with a soft damp cloth, then wipe dry. Tuscany® finishes are very durable.
PAGE 2
Package and Hardware Contents Product Specifications Maximum Flow Rate: 1.8 GPM (6.8 LPM) @ 60 PSI ASME A112.18.1/CSA B125 NSF/ANSI 61 Ceramic cartridge Manufactured to include no more than 0.
PAGE 3
Installation Instructions 1. Shut off the water at the supply valves under the sink or at the main water supply. Disconnect the supply lines. Remove the existing faucet from the sink. Clean and dry the surface area where the new faucet will be mounted. 1 2. For installation with a deckplate, apply a thin bead of silicone to the underside of the putty plate (C).
PAGE 4
Installation Instructions (Continued) 6. Slightly move the water supply connectors (6.1) away from the quick-connect sprayer outlet (6.2). Be careful not to kink the copper tubes. Remove the protective cap (6.3) from the quick-connect sprayer outlet (6.2). Push the end of the quickconnect sprayer hose (6.4) with the quick-connect coupling (6.5) onto the quickconnect sprayer outlet (6.2). Give the sprayer hose (6.4) a gentle tug to ensure it is connected at both ends. 6.2 6.5 6.1 6.3 6.4 6 7.
PAGE 5
Installation Instructions (Continued) 11. Once the installation is complete, remove the hand sprayer (11.1) from the sprayer hose (11.2) on the faucet body (A) to flush the water lines. Turn on the water supply and allow both hot and cold water to run for at least one minute to flush away any debris that could cause damage to internal parts. While the water is running, check for leaks. If a leak occurs, gently tighten the nut on the connection that is leaking.
PAGE 6
Replacement Parts For replacement parts, call our customer service department at (877) 319-3757, 7:30 a.m. - 4:30 p.m., CST, Monday Friday.
PAGE 7
Limited Lifetime Warranty The distributor warrants to the original consumer purchaser this product to be free from defects in material and workmanship under normal use in residential applications. At its option, the Company will provide repair parts or replace defective product when the product is used in accordance with the manufacturer’s specifications.