Installation Instructions

HAVE A QUESTION? DO NOT GO BACK TO THE STORE. IF YOU NEED TECHNICAL ASSISTANCE,
PARTS OR IF YOU HAVE INSTALLATION OR WARRANTY QUESTIONS, WE CAN HELP.
PLEASE CALL OUR CUSTOMER SERVICE DEPARTMENT.
To better assist you, please have your model number (located on the customer service tag)
available when you call.
888-856-6322, 8am to 5pm PST Monday- Friday
Prior to beginning installation, turn o the cold and hot water
lines and turn on the old faucet to release built-up pressure.
When installing your new faucet, turn the connector nuts nger
tight, then use a wrench to anchor the tting and a second
wrench to tighten the nuts one additional turn. Connections
that are too tight can compromise the integrity of the system.
Wrap all threaded connections with a Teon tape. Always wrap
in a clockwise direction.
Installation
· If you use soldering for the installation of the faucet, the seats,
cartridges and washers will have to be removed before using
a ame. Otherwise, the warranty will be void on these parts.
· Protect your eyes with safety glasses when cutting or soldering
water supply lines.
· Cover your drain to avoid losing parts.
Your new faucet is designed for years of trouble-free
performance. Keep it looking new by cleaning it periodically
with a soft cloth. Avoid abrasive cleaners, steel wool and harsh
chemicals as these will dull the nish and void your warranty.
· Adjusted Wrench
· Safety Goggles
· Screwdriver
· Silicone Sealant
For Model 673-6075
Sharena
Stainless Steel Finish
Pull-down Kitchen Faucet
Tools
Maintenance
Safety Tips
Important Points
Need Help
1

Summary of content (6 pages)