Installation Instructions

HAVE A QUESTION? DO NOT GO BACK TO THE STORE. IF YOU NEED TECHNICAL

ASSISTANCE, PARTS OR IF YOU HAVE INSTALLATION OR WARRANTY QUESTIONS,

WE CAN HELP. PLEASE CALL OUR CUSTOMER SERVICE DEPARTMENT.

To better assist you, please have your model number (located on the customer

service tag) available when you call.

888-856-6322, 8am to 5pm PST Monday- Friday

Insert the faucet body (A) into the center mounting hole

in the sink.

Secure the faucet body (A) to the sink by installing the

rubber washer (J), plastic support piece (K), and

U-Shaped metal washer (L) onto the threaded rod (D), as

shown; then thread the mounting nut (M) onto the

threaded rod and tighten securely.

Note: Ensure that the water lines are ushed before

installing the faucet.

2. Place the base (C) onto the center mounting hole in the

sink.

1. Place the deck plate (F) and base plate (G) over the three

mounting holes in the sink.

Place the base (C) over the center mounting hole on the

deck plate (F).

Note: If you do not wish to install this faucet with

the deck plate, proceed to step 2.

Apply a thin bead of silicone sealant (not included)

around the bottom of the base plate (G).

Preparation / Assembly

Step 1-3